Publications
2026
Peer-reviewed journal article
Computational and experimental investigation of thermodynamic and atomic diffusion behavior in relation to microstructural evolution for Inconel 718 alloy during the wire arc additive manufacturing process
Tolcha, Mesay Alemu; Altenbach, Holm; Naumenko, Konstantin; Lemu, Hirpa Gelgele
In: Journal of alloys and compounds - Lausanne : Elsevier, Bd. 1050 (2026), Artikel 185783, insges. 16 S.
Anovel peridynamic cylindrical shell formulation
Yang, Zhenghao; Naumenko, Konstantin; Oterkus, Selda; Oterkus, Erkan
In: Thin-walled structures - Amsterdam [u.a.] : Elsevier Science, Bd. 221 (2026), Artikel 114430, insges. 27 S.
Asymptotic continualisation of high-contrast lattices and the interpretation of gradient elasticity
Kaplunov, Julius; Nazarenko, Lidiia; Altenbach, Holm
In: International journal of engineering science - New York, NY [u.a.] : Science Direct, Bd. 221 (2026), Artikel 104456, insges. 12 S.
Surface waves in magneto-piezoelectric thermo-microstretch material without energy dissipation
Debnath, Sanjay; Singh, S. Sarat; Altenbach, Holm
In: Continuum mechanics and thermodynamics - Berlin : Springer, Bd. 38 (2026), Heft 2, Artikel 17, insges. 22 S.
2025
Book chapter
Investigation of interlayer influence on the dynamic impact response of the laminated glass plate
Sukhanova, Olha; Larin, Oleksiy; Naumenko, Konstantin
In: Collaborative Research Advancing Engineering Solutions for Real-World Challenges 2 - Cham : Springer Nature Switzerland ; Öchsner, Andreas *1970-* . - 2025, S. 20-30 [Seminar: 4th PhD Seminar, Esslingen, 21st June 2024]
Statistical size influence and support effect of electrical steel strips
Schwarz, Patrick; Naumenko, Konstantin; Häfele, Peter
In: Collaborative Research Advancing Engineering Solutions for Real-World Challenges 2 - Cham : Springer Nature Switzerland ; Öchsner, Andreas *1970-* . - 2025, S. 60-71 [Seminar: 4th PhD Seminar, Esslingen, 21st June 2024]
Enhanced constitutive creep-fatigue model for industry using neural networks-based parameter identification and implementation in FE-code
Kostenko, Yevgen; Naumenko, Konstantin; Jahnke, Alexander
In: ASME Turbo Expo 2025: Turbomachinery Technical Conference and Exposition, Volume 7: Manufacturing materials & metallurgy; microturbines, turbochargers & Ssmall turbomachines; oil & gas applications; steam turbine; structures and dynamics: aerodynamics excitation & damping - New York, N.Y. : The American Society of Mechanical Engineers, Artikel Paper-No. GT2025-153596, V007T20A010, insges. 11 S. [Konferenz: ASME Turbo Expo 2025, Memphis, Tennessee, USA, June 16-20, 2025]
Rods with long-range force interactions - governing equations, boundary conditions and benchmark problems
Oksanchenko, Alvina; Naumenko, Konstantin
In: Collaborative Research Advancing Engineering Solutions for Real-World Challenges 2 - Cham : Springer Nature Switzerland ; Öchsner, Andreas *1970-* . - 2025, S. 3-19 [Seminar: 4th PhD Seminar, Esslingen, 21st June 2024]
Ludwik, Paul
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-2
Ludwik, Paul
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-2
Preface
Altenbach, Holm
In: Current Developments in Solid Mechanics and Their Applications , 1st ed. 2025. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. V-VI - (Advanced Structured Materials; 223)
Effect of nanosized surface roughness in solids with the account of Steigmann-Ogden mode
Kostyrko, Sergey; Grekov, Mikhail; Altenbach, Holm
In: Current Developments in Solid Mechanics and Their Applications , 1st ed. 2025. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 349-372 - (Advanced Structured Materials; 223)
Ludwik, Paul
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-2
Prandtl, Ludwig
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-2
Truesdell, Clifford Ambrose III
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-2
Ludwik, Paul
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-2
Hencky, Heinrich
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-3
Carathéodory, Constantin
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-2
Creep and damage processes in cyclically loaded model of turbine rotor
Altenbach, Holm; Breslavsky, Dmytro; Senko, Alyona; Tatarinova, Oksana
In: Advances in Mechanical and Power Engineering II - Selected Papers from The International Conference on Advanced Mechanical and Power Engineering (CAMPE 2023), October 16-19, 2023 , 1st ed. 2025. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 176-185 [Konferenz: International Conference on Advanced Mechanical and Power Engineering, CAMPE 2023, Kharkiv, Ukraine, October 16-19, 2023]
von Kármán, Theodore
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-4
von Mises, Richard
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-2
Orowan, Egon
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-2
Argyris, John Hadji
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-2
Burgers, Johannes Martinus
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-2
Geiringer, Hilda
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-3
Taylor, Geoffrey Ingram
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-2
Reuss, András
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-2
Hill, Rodney
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-3
Prager, William
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-3
Polanyi, Mihály (Michael)
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-2
Siebel, Erich
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-2
Johnson, William
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-3
Lehmann, Johannes Theodor
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-2
Zerna, Wolfgang
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-2
Zienkiewicz, Olgierd Cecil
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-3
Morozov, Nikita Fedorovich
Altenbach, Holm; Belyaev, Alexander
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-6
Ludwik, Paul
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-2
Nádai, Arpád
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-2
Ludwik, Paul
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-2
Ludwik, Paul
Altenbach, Holm; Bruhns, Otto T.
In: Encyclopedia of Continuum Mechanics - Berlin, Heidelberg : Springer ; Altenbach, Holm *1956-* . - 2025, S. 1-2
Engineering Design Applications VII
Öchsner, Andreas; Altenbach, Holm
In: Cham: Springer Nature Switzerland, 2025, Online-Ressource - (Advanced Structured Materials Series; v.209), ISBN: 978-3-031-84346-4
Peer-reviewed journal article
Analytical solutions for 1-dimensional peridynamic systems by considering the effect of damping
Yang, Zhenghao; Oterkus, Erkan; Oterkus, Selda; Naumenko, Konstantin
In: Computer modeling in engineering & sciences - Henderson, Nevada : Tech Science Press, Bd. 143 (2025), Heft 2, S. 2491-2508
Towards the classification and numerical prediction of fracture patterns in float glass using peridynamics
Naumenko, Konstantin; Larin, Oleksiy; Sukhanova, Olha; Pander, Matthias
In: Engineering failure analysis - Oxford [u.a.] : Elsevier Science, Bd. 180 (2025), Artikel 109802, insges. 19 S.
Wave dispersion relations in peridynamics - Influence of kernels and similarities to nonlocal elasticity theories
Eremeyev, Victor A.; Naumenko, Konstantin
In: International journal of engineering science - New York, NY [u.a.] : Science Direct, Bd. 211 (2025), insges. 7 S.
Series solutions to elastic opening of double cantilever beam for several traction-separation laws
Yang, Zhenghao; Naumenko, Konstantin; Dai, Guozhao; Lu, Nan-You
In: Mechanics research communications - Amsterdam [u.a.] : Elsevier, Bd. 145 (2025), Artikel 104391, insges. 13 S.
Solution to the inverse problem of the angular manipulator kinematics with six degrees of freedom
Andrieiev, Yurii; Breslavsky, Dmytro; Shabanov, Hennadii; Naumenko, Konstantin; Altenbach, Holm
In: Applied Sciences - Basel : MDPI, Bd. 15 (2025), Heft 5, Artikel 2840, insges. 24 S.
First order shear deformation beam theories in a peridynamic framework
Naumenko, Konstantin; Yang, Zhenghao
In: European journal of mechanics. A, Solids - Paris : Elsevier, Bd. 112 (2025), Artikel 105633, insges. 17 S.
Dynamic boundary value problem for the half-space under the condition of a Volterra viscoelastic model
Shavlakadze, Nugzar; Altenbach, Holm
In: Acta mechanica - Wien : Springer, Bd. 236 (2025), Heft 9, S. 5547-5558
Study of two-dimensional nonlinear coupled time-space fractional order reaction advection diffusion equations using shifted Legendre-Gauss-Lobatto collocation method
Anjuman, O.; Chopra, Manish; Das, Subir; Altenbach, Holm
In: Continuum mechanics and thermodynamics - Berlin : Springer, Bd. 37 (2025), Artikel 5, insges. 22 S.
Elastodynamic interactions in thermoelastic diffusion including non‐local and phase lags
Sharma, Saurav; Marin, Marin; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH, Bd. 105 (2025), Heft 1, Artikel e202401059, insges. 13 S.
Implementation of isotropic hyperelastic material models - a template approach
Eisenträger, Sascha; Maurer, Lukas; Juhre, Daniel; Altenbach, Holm; Eisenträger, J.
In: Acta mechanica - Wien : Springer, Bd. 236 (2025), Heft 3, S. 1899-1934
Axisymmetric problem within strain-gradient elasticity and mixed FEM solution for cylinders with cracks under tension
Nazarenko, Lidiia; Chirkov, Aleksandr Yu; Altenbach, Holm
In: Mathematics and mechanics of solids - Thousand Oaks, Calif. [u.a.] : Sage, Bd. 30 (2025), Heft 12, S. 2896-2914
Statistical homogenization of particulate composites within strain gradient elasticity
Nazarenko, Lidiia; Altenbach, Holm
In: Acta mechanica - Wien : Springer, Bd. 236 (2025), Heft 12, S. 7181-7197
Investigation of thermally conducting collinear cracks in an orthotropic composite medium under uniform heat flow
Tanwar, Anshika; Das, Shiv Shankar; Das, Subir; Altenbach, Holm
In: Mechanics of composite materials - Dordrecht [u.a.] : Springer Science + Business Media B.V, Bd. 61 (2025), Heft 5, S. 911-930
Bio-thermoelastic wave reflection under MGT heat equation and hyperbolic two-temperature model
Sharma, Kunal; Marin, Marin; Kumar, Rajneesh; Altenbach, Holm
In: Archive of applied mechanics - Berlin : Springer, Bd. 95 (2025), Heft 11, Artikel 261, insges. 29 S.
Implementation of isotropic hyperelastic material models - automatic code generation in MATLAB
Eisenträger, Sascha; Maurer, Lukas; Juhre, Daniel; Altenbach, Holm; Eisenträger, Johanna
In: Acta mechanica - Wien : Springer, Bd. 236 (2025), Heft 6, S. 3413-3444
Variational Principles in Coupled Strain Gradient Elasticity
Altenbach, Holm; Nazarenko, Lidiia
In: Lecture notes of TICMI / Tbilisi International Centre of Mathematics and Informatics - Tbilisi : Univ. Press, Bd. 25 (2024), S. 9-20
Peculiarities of combined mixing caused by instability of mechanical equilibrium of isothermal ternary gas mixture at diffusion
Kossov, Vladimir N.; Mukamedenkyzy, Venera; Tolepbergen, Arsen; Altenbach, Holm
In: International journal of chemical engineering - [Hoboken, NJ : Wiley] . - 2025, Artikel 643371, insges. 10 S.
Combined influence of stretch-bending straightening and ageing on the tensile properties of packaging steels
Möller, Sebastian; Nouskalis, Dimitrios; Ehmke, Björn; Altenbach, Holm; Dresbach, Christian
In: Metals - Basel : MDPI, Bd. 15 (2025), Artikel 894, insges. 19 S.
A model of thermo-electric-elastic dielectric under microwave irradiation
Shorkin, Vladimir; Altenbach, Holm; Vilchevskaya, Elena; Romashin, Sergei
In: Nanoscience and technology - New York : Begell . - 2025, insges. 20 S.
Dissertation
Deformation and strength analysis of glass structures by classical continuum mechanics and peridynamics
Sukhanova, Olha; Naumenko, Konstantin
In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2025, 1 Online-Ressource (xiv, 120 Seiten, 31.35 MB) [Literaturverzeichnis: Seite 113-120]
Charakterisierung der thermo-mechanischen Eigenschaften additiv gefertigter Komponenten
Tomas, Josef; Altenbach, Holm
In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2025, 1 Online-Ressource (B, III, 112 Blätter, 73,68 MB) [Literaturverzeichnis: Blatt 87-99]
Modeling the inelastic behavior of high-temperature steels exerted to variable loading conditions
Knape, Katharina; Altenbach, Holm
In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2025, 1 Online-Ressource (xiii, 109 Blätter, 37.84 MB) [Literaturverzeichnis: Blatt 97-109]
Editor
Materials and Strength of Gas Turbine Parts - Volume 2: Corrosion, High-Temperature Coatings, Non-Classical Strength Calculations, and Methods of Ensuring the Reliability of Gas Turbine Unit
Borisovich Getsov, Leonid; Altenbach, Holm; Naumenko, Konstantin
In: Singapore: Imprint: Springer, 2025., 1 Online-Ressource(XXVIII, 557 p. 312 illus., 72 illus. in color.) - (Advanced Structured Materials; 243), ISBN: 9789819506408
Advances in Mechanical and Power Engineering II - Selected Papers from The International Conference on Advanced Mechanical and Power Engineering (CAMPE 2023), October 16-19, 2023
Altenbach, Holm; Gao, Xiao-Wei; Syngellakis, Stavros; Cheng, Alexander H.-D.; Lampart, Piotr; Tkachuk, Anton
In: Cham: Imprint: Springer, 2025., 1 Online-Ressource(XX, 326 p. 136 illus., 91 illus. in color.) - (Lecture Notes in Mechanical Engineering), ISBN: 978-3-031-82979-6
Advanced problems in mechanics
Altenbach, Holm; Kuzkin, Vitaly
In: Cham: Springer, 2025, 1 Online-Ressource, ISBN: 978-3-031-80103-7
Other materials
Current developments in solid mechanics and their applications
Altenbach, Holm
In: Cham: Springer, 2025, 1 Online-Ressource (xxxi, 750 Seiten) - (Advanced structured materials; volume 223), ISBN: 978-3-031-90022-8
Scientific monograph
Behavior of metallic and composite structures (third volume)
Sadowski, Tomasz; Altenbach, Holm
In: Basel: MDPI, 2025, 1 Online-Ressource [This is a reprint of articles from the Special Issue published online in the open access journal Materials (ISSN 1996-1944)]
Holzmann/Meyer/Schumpich Technische Mechanik Festigkeitslehre
Altenbach, Holm
In: Wiesbaden: Springer Vieweg, 2025, 1 Online-Ressource (XII, 434 Seiten), ISBN: 978-3-658-49646-3
2024
Book chapter
Notch effect under cyclic loading of electrical steel strips
Schwarz, Patrick; Häferle, Peter; Naumenko, Konstantin
In: Lectures Notes on Advanced Structured Materials 2 - Cham : Springer International Publishing AG ; Altenbach, Holm . - 2024, S. 377-400 - (Advanced structured materials; volume 203)
Numerical and experimental analysis of elastic three-layer plate under static and low velocity impact loading
Altenbach, Holm; Breslavsky, Dmytro; Konkin, Stanislav; Lysenko, Volodymyr; Naumenko, Konstantin
In: Progress in structural mechanics , 1st ed. 2024. - Cham : Springer International Publishing ; Altenbach, Holm, S. 1-18 - ( Advanced structured materials book series; volume 199)
The impact of mesh generation in finite element simulations on stress gradient and calculated fatigue strength
Schwarz, Patrick; Häferle, Peter; Naumenko, Konstantin
In: Collaborative Research Advancing Engineering Solutions for Real-World Challenges , 1st ed. 2024. - Cham : Springer Nature Switzerland ; Öchsner, Andreas, S. 111-121 [Seminar: 2023 Postgraduate Seminar in Esslingen]
On the ways to numerically implement the two-time-scale approach
Knape, Katharina; Altenbach, Holm
In: Lectures Notes on Advanced Structured Materials 2 - Cham : Springer International Publishing AG ; Altenbach, Holm . - 2024, S. 401-412 - (Advanced structured materials; volume 203)
Creep and fretting wear modelling for rod-cylinder periodical contacts
Breslavsky, Dmytro; Palamarchuk, Pavlo; Altenbach, Holm
In: State of the Art and Future Trends in Materials Modelling 2 , 1st ed. 2024. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 75-98 - (Advanced structured materials; volume 200)
Stages of Yaroslav M. Grigorenko’s life path and the main results of his scientific research
Altenbach, Holm; Bogdanov, Viacheslav; Grigorenko, Alexander; Khimich, Olexandr; Kushnir, Roman; Nazarenko, Vladimir
In: Selected Problems of Solid Mechanics and Solving Methods , 1st ed. 2024. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 1-14 - (Advanced structured materials; volume 204)
Reviewing yield criteria in plasticity theory
Altenbach, Holm; Kolupaev, Vladimir A.
In: Progress in structural mechanics , 1st ed. 2024. - Cham : Springer International Publishing ; Altenbach, Holm, S. 19-106 - ( Advanced structured materials book series; volume 199)
Overview
Altenbach, Holm; Hohe, Jörg; Mittelstedt, Christian
In: Progress in structural mechanics - Cham : Springer ; Altenbach, Holm *1956-* . - 2024, S. VII-VIII - ( Advanced structured materials book series; volume 199)
Continuum mechanics - material independent and dependent equations
Altenbach, Holm
In: Lectures Notes on Advanced Structured Materials 2 - Cham : Springer International Publishing AG ; Altenbach, Holm . - 2024, S. 3-24 - (Advanced structured materials; volume 203)
Peer-reviewed journal article
Monte-Carlo based algorithm for reconstruction of oriented microstructure
Nizinkovskyi, Rostyslav; Naumenko, Konstantin; Krüger, Manja
In: Proceedings in applied mathematics and mechanics - Weinheim : Wiley-VCH, Bd. 24 (2024), Heft 3, Artikel e202400110, insges. 10 S.
Plate buckling analysis in peridynamic framework
Yang, Zhenghao; Ma, Chien-Ching; Naumenko, Konstantin; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH, Bd. 105 (2025), Heft 4, Artikel e202400380, insges. 16 S.
Thermo-mechanical response and form-stability of a fully metallic composite Phase Change Material - dilatometric tests and finite element analysis
Gariboldi, Elisabetta; Molteni, Matteo; Vargas Vargas, Diego Andree´; Naumenko, Konstantin
In: Materials science & engineering. A, Structural materials - Amsterdam : Elsevier, Bd. 920 (2024), Artikel 147562, insges. 10 S.
M-integral for finite anti-plane shear of a nonlinear elastic matrix with rigid inclusions
Eremeyev, Victor A.; Naumenko, Konstantin
In: International journal of engineering science - New York, NY [u.a.] : Science Direct, Bd. 196 (2024), Artikel 104009, insges. 14 S.
Plane crack problems within strain gradient elasticity and mixed finite element implementation
Chirkov, Aleksandr Yu; Nazarenko, Lidiia; Altenbach, Holm
In: Computational mechanics - Berlin : Springer, Bd. 74 (2024), Heft 3, S. 703-721
Interplay of surface and bulk elasticity in morphological stability of ultra-thin film coatings
Shuvalov, Gleb; Kostyrko, Sergey; Altenbach, Holm
In: Continuum mechanics and thermodynamics - Berlin : Springer, Bd. 36 (2024), Heft 3, S. 503-523
Numerical modelling of the thermoforming behaviour of thermoplastic honeycomb composite sandwich laminates
Minupala, Varun Kumar; Zscheyge, Matthias; Glaesser, Thomas; Feldmann, Maik; Altenbach, Holm
In: Polymers - Basel : MDPI, Bd. 16 (2024), Heft 5, Artikel 594, insges. 14 S.
Variable thermal conductivity in context of Green‐Naghdi theory of thermo‐microstretch solids
Ailawalia, Praveen; Marin, Marin; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH, Bd. 104 (2024), Heft 4, Artikel e202400010, insges. 16 S.
Elasto-plasticity theory for large plastic deformation and its use for the material stiffness determination
Weber, Martin; Altenbach, Holm
In: Continuum mechanics and thermodynamics - Berlin : Springer, Bd. 36 (2024), Heft 5, S. 1305-1321
Analysis of finite creep strains in aluminum plates at static and cyclic loading
Breslavsky, Dmytro; Tatarinova, Oskana; Altenbach, Holm
In: The journal of strain analysis for engineering design - London : Sage Publ., Bd. 59 (2024), Heft 4, S. 229-240
Numerical modeling of Hidden damage accumulation due to radiation exposure and hydrogen embrittlement
Breslavsky, Dmytro; Tatarinova, Oksana; Tolstolutska, Galyna; Altenbach, Holm
In: Voprosy atomnoj nauki i techniki - Char'kov : [Verlag nicht ermittelbar], Bd. 2 (2024), Heft 150, S. 3-14
Influence of crystallization kinetics and flow behavior on structural inhomogeneities in 3D-printed parts made from semi-crystalline polymers
Sattler, Rene; Zhang, Rui; Gupta, Gaurav; Du, Mengxue; Runge, Paul-Maximilian; Altenbach, Holm; Androsch, René; Beiner, Mario
In: Macromolecules - Washington, DC : Soc., Bd. 57 (2024), Heft 7, S. 3066-3080
Modal characteristics of functionally graded porous Timoshenko beams with variable cross-sections
Burlayenko, V.N.; Altenbach, Holm; Dimitrova, S.D.
In: Composite structures - Amsterdam : Elsevier, Bd. 342 (2024), Artikel 118273, insges. 15 S.
Mixed formulation of the finite element method in the Tupin-Mindlin gradient theory of elasticity (in Ukrainian)
Chirkov, O. Yu; Nazarenko, Lidiia; Altenbach, Holm
In: Problemy pročnosti - Kiev : Naukova Dumka . - 2024, Heft 2, S. 5-17
Mixed formulation of finite element method within Toupin-Mindlin gradient elasticity theory
Chirkov, O. Yu; Nazarenko, Lidiia; Altenbach, Holm
In: Strength of materials - New York, NY, Bd. 56 (2024), Heft 2, S. 223-233
A general analytical approach to the thermoelastic analysis of asymmetric anisotropic nanoplate with polygonal holes
Zeighami, Vahid; Jafari, Mohammad; Altenbach, Holm
In: Continuum mechanics and thermodynamics - Berlin : Springer, Bd. 36 (2024), Heft 6, S. 1455-1480
High temperature creep and embrittlement in metals and alloys under conditions of the long-term usage
Saitova, Regina; Arutyunyan, Alexander; Altenbach, Holm
In: Acta mechanica - Wien : Springer, Bd. 235 (2024), Heft 10, S. 6033-6055
Creep damage and fracture of turbine blade roots
Breslavsky, Dmytro; Mietielov, Volodymyr; Senko, Alyona; Tatarinova, Oksana; Palkov, Ihor; Altenbach, Holm
In: Proceedings of the Institution of Mechanical Engineers. Part L, Journal of materials: Design and applications - London : Sage Publ., Bd. 239 (2025), Heft 5, S. 869-883
Shifted Legendre Gauss‐Lobatto collocation scheme for solving nonlinear coupled space‐time fractional reaction‐advection diffusion equations
Anjuman, Anjuman; Chopra, M.; Das, Subir; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH, Bd. 104 (2024), Heft 10, Artikel e202400043, insges. 22 S.
Influence of impact loading on creep, damage and fracture of metals
Breslavsky, Dmytro; Tatarinova, Oksana; Altenbach, Holm
In: Proceedings in applied mathematics and mechanics - Weinheim : Wiley-VCH, Bd. 24 (2024), Heft 2, Artikel e202400059, insges. 8 S.
Material plasticity - development of stiffness tetrads in fiber-reinforced materials with large plastic deformations
Weber, Martin; Glüge, Rainer; Altenbach, Holm
In: Proceedings in applied mathematics and mechanics - Weinheim : Wiley-VCH, Bd. 24 (2024), Heft 2, Artikel e202400184, insges. 18 S.
Mixed finite element implementation of plane crack problems within strain gradient elasticity
Chirkov, Alexandr Yu.; Nazarenko, Lidiia; Altenbach, Holm
In: Proceedings in applied mathematics and mechanics - Weinheim : Wiley-VCH, Bd. 24 (2024), Heft 2, Artikel e202400009, insges. 9 S.
Asymptotic partition of energies for a Cosserat thermoelastic medium
Altenbach, Holm; Öchsner, Andreas; Vlase, S.
In: Bulletin of the Transilvania University of Braşov. Series III, Mathematics and computer science - Braşov : Transilvania University Press, Bd. 4 (2024), Heft 2, S. 35-52
Effects of stretch-bending straightening on the tensile properties of cold rolled packaging steel
Möller, Sebastian; Nouskalis, Dimitrios; Ehmke, Björn; Matusch, Dirk; Dresbach, Christian; Altenbach, Holm
In: Metals - Basel : MDPI, Bd. 14 (2024), Heft 11, Artikel 1203, insges. 14 S.
Mixed FEM implementation of three-point bending of the beam with an edge crack within strain gradient elasticity theory
Chirkov, Aleksandr Yu.; Nazarenko, Lidiia; Altenbach, Holm
In: Continuum mechanics and thermodynamics - Berlin : Springer, Bd. 37 (2025), Artikel 1, insges. 18 S.
The influence of a sudden impact loading on the creep, damage, and fracture of beams made from functionally graded materials
Breslavsky, Dmytro; Palamarchuk, Pavlo; Tatarinova, Oksana; Altenbach, Holm; Pellicano, Francesco
In: Fatigue & fracture of engineering materials & structures - Oxford [u.a.] : Wiley-Blackwell, Bd. 48 (2025), Heft 2, S. 931-941
Rheological Modeling
Altenbach, Holm
In: Vestnik Rossijskoj Akademii Nauk / Rossijskaja akademija nauk - Moskva : Nauka, Bd. 94 (2024), Heft 12, S. 1090-1099
Dissertation
Rechnerische Abschätzung der Schwingfestigkeit von Elektroblech unter Berücksichtigung des Fertigungseinflusses
Kubaschinski, Paul; Altenbach, Holm
In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2024, 1 Online-Ressource (XXII, 164 Seiten, 25,32 MB) [Literaturverzeichnis: Seite [139]-153][Literaturverzeichnis: Seite [139]-153]
Editor
Progress in structural mechanics
Altenbach, Holm; Hohe, Jörg; Mittelstedt, Christian
In: Cham: Springer, 2024., 1 Online-Ressource (XX, 304 Seiten) - (Advanced Structured Materials; Volume 199), ISBN: 978-3-031-45554-4 [Literaturangaben]
Lectures Notes on Advanced Structured Materials 2
Altenbach, Holm; Hitzler, Leonard; Johlitz, Michael; Merkel, Markus; Öchsner, Andreas
In: Cham: Springer International Publishing AG, 2024, 1 Online Ressource - (Advanced Structured Materials Series; volume 203), ISBN: 978-3-031-49043-9
State of the Art and Future Trends in Materials Modelling 2
Altenbach, Holm; Öchsner, Andreas
In: Cham: Imprint: Springer, 2024., 1 Online-Ressource(XXX, 634 p. 283 illus., 215 illus. in color.) - (Advanced Structured Materials; 200), ISBN: 978-3-031-72900-3
Selected Problems of Solid Mechanics and Solving Methods
Altenbach, Holm; Bogdanov, Viacheslav; Grigorenko, Alexander Ya; Kushnir, Roman M.; Nazarenko, Vladimir M.; Eremeyev, Victor A.
In: Cham: Imprint: Springer, 2024., 1 Online-Ressource(XII, 532 p. 203 illus., 79 illus. in color.) - (Advanced Structured Materials; 204), ISBN: 978-3-031-54063-9
2023
Book chapter
Fortgeschrittene Methoden für die Schädigungsanalyse von Glaslaminaten bei dynamischen Beanspruchungen
Bornemann, Steffen; Henning, Sven; Naumenko, Konstantin; Pander, Matthias; Riedel, Kristin; Würkner, Mathias
In: Glasbau ... ; 2023 - Berlin : Ernst & Sohn ; Weller, Bernhard *195X-*, S. 335-347
Development of a microstructure-based finite element model of thermomechanical Response of a fully metallic composite phase change material
Gariboldi, Elisabetta; Molteni, Matteo; Vargas Vargas, Diego André; Naumenko, Konstantin
In: Creep in Structures VI - IUTAM Symposium Proceedings , 1st ed. 2023. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 131-142 - (Advanced structured materials; volume 194) [Symposium: IUTAM Symposium Creep in Structures VI, Magdeburg, Germany, 18-22 September 2023]
Creep mechanics - some historical remarks and new trends
Altenbach, Holm; Eisenträger, Johanna; Knape, Katharina; Naumenko, Konstantin
In: Creep in Structures VI - IUTAM Symposium Proceedings , 1st ed. 2023. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 57-68 - (Advanced structured materials; volume 194) [Symposium: IUTAM Symposium Creep in Structures VI, Magdeburg, Germany, 18-22 September 2023]
Various state-of-the-art methods for creep evaluation of power plant components in a wide load and temperature range
Blum, Eike; Kostenko, Yevgen; Naumenko, Konstantin
In: Creep in Structures VI - IUTAM Symposium Proceedings , 1st ed. 2023. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 69-82 - (Advanced structured materials; volume 194) [Symposium: IUTAM Symposium Creep in Structures VI, Magdeburg, Germany, 18-22 September 2023]
A brief review of the development of mechanics in the National Academy of Sciences of Ukraine
Altenbach, Holm; Bogdanov, Viacheslav; Bulat, Anatolii; Guz, Aleksander; Nazarenko, Vladimir
In: Advances in mechanics - current research results of the NAS of Ukraine - Cham : Springer Nature Switzerland ; Guz, Aleksander N. . - 2023, S. 1-19 - ( Advanced structured materials$xl191)
Creep and damage of materials at elevated temperatures
Altenbach, Holm
In: Advanced theories for deformation, damage and failure in materials / Course Advanced Theories for Deformation, Damage and Failure in Materials , 2020 - Springer Cham : Springer ; Altenbach, Holm *1956-* . - 2023, S. 1-62 - (CISM International Centre for Mechanical Sciences; 605)
Application of nonlinear viscoelastic material models for the shrinkage and warpage analysis of blow molded parts
Michels, Patrick; Dresbach, Christian; Dorp, Esther Ramakers-van; Altenbach, Holm; Bruch, Olaf
In: Creep in Structures VI - IUTAM Symposium Proceedings , 1st ed. 2023. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 205-232 - (Advanced structured materials; volume 194) [Symposium: IUTAM Symposium Creep in Structures VI, Magdeburg, Germany, 18-22 September 2023]
Creep-damage processes in cyclic loaded double walled structures
Altenbach, Holm; Breslavsky, Dmytro; Tatarinova, Oksana
In: Creep in Structures VI - IUTAM Symposium Proceedings , 1st ed. 2023. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 19-56 - (Advanced structured materials; volume 194) [Symposium: IUTAM Symposium Creep in Structures VI, Magdeburg, Germany, 18-22 September 2023]
A constitutive model for non-linear basic creep of plain concrete
Eisenträger, Johanna; Altenbach, Holm
In: Advances in Linear and Nonlinear Continuum and Structural Mechanics , 1st ed. 2023. - Cham : Springer Nature Switzerland ; Altenbach, Holm, S. 135-154 - (Advanced structured materials book series; volume 198)
Rheological modeling - historical remarks and actual trends in solid mechanics
Altenbach, Holm
In: Advances in mechanics of time-dependent materials - Cham : Springer Nature ; Altenbach, Holm . - 2023, S. 1-16 - (Advanced structured materials; volume 188)
Preface
Altenbach, Holm; Ganczarski, Artur
In: Advanced theories for deformation, damage and failure in materials / Course Advanced Theories for Deformation, Damage and Failure in Materials , 2020 - Springer Cham : Springer ; Altenbach, Holm *1956-* . - 2023, S. v-vi - ( CISM international centre for mechanical sciences; volume 605)
Fast fracture of conic shell under the action of belt explosive charge
Altenbach, Holm; Breslavsky, Dmytro; Chernobryvko, Marina; Senko, Alyona; Tatarinova, Oksana
In: Advances in Mechanical and Power Engineering - selected papers from The International Conference on Advanced Mechanical and Power Engineering (CAMPE 2021), October 18-21, 2021 - Cham : Springer Nature Switzerland AG ; Altenbach, Holm *1956-* . - 2023, S. 366-376 [Konferenz: 14th International Conference on Advanced Mechanical and Power Engineering, CAMPE 2021, Kharkiv, Ukraine, October 18-21, 2021]
On the general strategies to formulate shell and plate theories
Altenbach, Holm; Eremeyev, Victor A.
In: Progress in continuum mechanics ; Altenbach, Holm . - 2023, S. 37-46 - ( Advanced Structured Materials; 196)
Peer-reviewed journal article
Closed-form series solutions to peridynamic rod equations - influence of kernel function
Naumenko, Konstantin; Yang, Zhenghoa; Ma, Chien-Ching; Chen, Yang
In: Technische Mechanik - Magdeburg : Inst., Bd. 43 (2023), Heft 2, S. 259-270
A penalty method for coupling of finite-element and peridynamic models
Pernatii, Anna; Gabbert, Ulrich; Naumenko, Konstantin; Hesse, Jan-Timo; Willberg, Christian
In: Proceedings in applied mathematics and mechanics - Weinheim : Wiley-VCH, Bd. 22 (2023), Heft 1, Artikel e202200151, insges. 6 S.
Peridynamic analysis of curved elastic beams
Yang, Zhenghao; Naumenko, Konstantin; Ma, Chien-Ching; Oterkus, Erkan; Oterkus, Selda
In: European journal of mechanics / A - Paris : Elsevier, Bd. 101 (2023), Artikel 105075
Closed-form analytical solutions for the deflection of elastic beams in a peridynamic framework
Yang, Zhenghao; Naumenko, Konstantin; Ma, Chien-Ching; Chen, Yang
In: Applied Sciences - Basel : MDPI, Bd. 13 (2023), Heft 18, Artikel 10025, insges. 20 S.
From the editorial board of the journal mechanics of composite materials
Altenbach, Holm; Cate, Andris
In: Mechanics of composite materials - Dordrecht [u.a.] : Springer Science + Business Media B.V, Bd. 59 (2023), Heft 2, S. 171-172
Young's modulus of the different crystalline phases of poly (L-lactic acid)
Jariyavidyanont, Katalee; Yu, Qiang; Petzold, Albrecht; Thurn-Albrecht, Thomas; Glüge, Rainer; Altenbach, Holm; Androsch, René
In: Journal of the mechanical behavior of biomedical materials - Amsterdam [u.a.] : Elsevier, Bd. 137 (2023), S. 1-11, Artikel 105546
Solving some problems of crack mechanics for a normal edge crack in orthotropic solid within the cohesive zone model approach
Selivanov, M.; Bogdanov, V.; Altenbach, Holm
In: Mechanics of composite materials - Dordrecht [u.a.] : Springer Science + Business Media B.V, Bd. 59 (2023), Heft 2, S. 335-362
Analysis and modeling of semi-open thermoplastic honeycomb core structures for mechanical simulation with representative volume elements
Rusch, H.; Horn, A.; Altenbach, Holm
In: Mechanics of composite materials - Dordrecht [u.a.] : Springer Science + Business Media B.V, Bd. 59 (2023), Heft 2, S. 381-392
Editorial
Altenbach, Holm; Ivanova, Elena; Müller, Wolfgang H.
In: ZAMM - Berlin : Wiley-VCH, Bd. 103 (2023), Heft 4, Artikel 202302003
Delamination of multilayered beams with non-linear viscoelastic behaviour under strains of step-like varying velocity
Rizov, Victor; Altenbach, Holm
In: Journal of theoretical and applied mechanics - Warsaw : Versita, Bd. 53 (2023), Heft 2, S. 99-115
Thermally stressed thermoelectric microbeam supported by Winkler foundation via the modified Moore-Gibson-Thompson thermoelasticity theory
Abouelregal, Ahmed E.; Marin, Marin; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH, Bd. 103 (2023), Heft 11, Artikel e202300079
Linear theory of micropolar media with internal nonlocal potential interactions
Shorkin, Vladimir S.; Vilchevskaya, Elena N.; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH, Bd. 103 (2023), Heft 11, Artikel e202300099, insges. 27 S.
Stress-strain state and wear modelling for fuel rod-grid contact
Breslavsky, Dmytro; Palamarchuk, Pavlo; Tolstolutska, Galyna; Altenbach, Holm
In: Voprosy atomnoj nauki i techniki - Char'kov : [Verlag nicht ermittelbar], Bd. 2 (2023), Heft 144, S. 8-14
Modeling of SI engine modification for higher ethanol blended gasoline engine applications - Part I - Parametric study using port flow simulation
Amare Zeru, Balewgize; Ramayya, Venkata A.; Altenbach, Holm
In: Ethiopian Journal Applied Sciences and Technology - Jimma : Jimma University . - 2023, Heft Special issue 2, S. 42-50
Preface
Öchsener, Andreas; Altenbach, Holm
In: Materials science and engineering technology - Weinheim : Wiley-VCH, Bd. 54 (2023), Heft 4, S. 369-370
Coupled problems of gradient thermoelasticity for periodic structures
Lurie, S.; Volkov-Bogorodskii, D.; Altenbach, Holm; Belov, P.; Nazarenko, Lidiia
In: Archive of applied mechanics - Berlin : Springer, Bd. 93 (2023), Heft 1, S. 23-39
An overview of selected material properties in finite element modeling of the human femur
Bazyar, Pourya; Baumgart, Andreas; Altenbach, Holm; Usbeck, Anna
In: Biomechanics - Basel, Switzerland : MDPI, Bd. 3 (2023), Heft 1, S. 124-135
A fatigue lifetime prediction model for aluminum bonding wires
Moers, Cassandra; Dresbach, Christian; Altenbach, Holm
In: Metals - Basel : MDPI, Bd. 13 (2023), Heft 10, Artikel 1781, insges. 18 S.
Diffusion mechanisms of convective instability in liquid and gas mixtures
Kossov, Vladimir; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH, Bd. 103 (2023), Heft 11, Artikel e202300801, insges. 12 S.
Elastic properties of polycrystalline silicon: experimental findings, effective estimates, and their relations
Aßmus, Marcus; Altenbach, Holm
In: Continuum mechanics and thermodynamics - Berlin : Springer, Bd. 35 (2023), Heft 2, S. 595-624
Size effects in numerical homogenization of polycrystalline silicon
Weber, Martin; Aßmus, Marcus; Glüge, Rainer; Zabiensky, von Max; Altenbach, Holm
In: Proceedings in applied mathematics and mechanics - Weinheim : Wiley-VCH, Bd. 23 (2023), Heft 3, Artikel e202300221, insges. 8 S.
Interaction among interfacial offset cracks in composite materials under the anti-plane shear loading
Tanwar, Anshika; Das, Subir; Craciun, Eduard-Marius; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH, Bd. 103 (2023), Heft 11, Artikel e20230081, insges. 15 S.
Modelling and simulation of the hardness profile and its effect on the stress-strain behaviour of punched electrical steel sheets - Modellierung und Simulation des Härteprofils und dessen Einfluss auf das Spannungs-Dehnungs-Verhalten gestanzter Elektrobleche
Kubaschinski, Paul; Gottwalt-Baruth, A.; Tetzlaff, U.; Altenbach, Holm; Waltz, M.
In: Materials science and engineering technology - Weinheim : Wiley-VCH, Bd. 54 (2023), Heft 4, S. 512-526
Fracture analysis of inhomogeneous arch with two longitudinal cracks under non-linear creep
Rizov, Victor I.; Altenbach, Holm
In: Advances in materials research - Daejeon : Techno-Press, Bd. 12 (2023), Heft 1, S. 15-29
Size effects in the elastic properties of polycrystalline silicon
Aßmus, Marcus; Zabiensky, Max; Weber, Martin; Altenbach, Holm
In: Applied research - Weinheim : Wiley-VCH, Bd. 3 (2023), Heft 1, Artikel e202300014, insges. 18 S.
Deformation analysis of friction welded hybrid structures
Heppner, Eric; Glüge, Rainer; Weber, Martin; Woschke, Elmar
In: Proceedings in applied mathematics and mechanics - Weinheim : Wiley-VCH, Bd. 22 (2023), Heft 1, Artikel e202100206, insges. 2 S.
Editor
Creep in Structures VI - IUTAM Symposium Proceedings
Altenbach, Holm; Naumenko, Konstantin
In: Cham: Imprint: Springer, 2023., 1 Online-Ressource(XX, 334 p. 184 illus., 143 illus. in color.) - (Advanced Structured Materials; 194), ISBN: 978-3-031-39070-8
Mechanics of High-Contrast Elastic Solids - Contributions from Euromech Colloquium 626
Altenbach, Holm; Prikazchikov, Danila; Nobili, Andrea
In: Cham: Imprint: Springer, 2023., 1 Online-Ressource(XII, 264 p. 83 illus., 67 illus. in color.) - (Advanced Structured Materials; 187), ISBN: 978-3-031-24141-3
Mechanics of Heterogeneous Materials
Altenbach, Holm; Bruno, Giovanni; Eremeyev, Victor A.; Gutkin, Mikhail Yu; Müller, Wolfgang H.
In: Cham: Imprint: Springer, 2023., 1 Online-Ressource(XXXI, 513 p. 271 illus., 201 illus. in color.) - (Advanced Structured Materials; 195), ISBN: 978-3-031-28744-2
Advances in mechanics - current research results of the NAS of Ukraine
Guz, Aleksander N.; Altenbach, Holm; Bogdanov, Viacheslav; Nazarenko, Vladimir M.
In: Cham: Springer, 2023, 1 Online-Ressource - (Advanced structured materials; volume 191), ISBN: 978-3-031-37313-8
Engineering Design Applications V - Structures, Materials and Processes
Öchsner, Andreas; Altenbach, Holm
In: Cham: Imprint: Springer, 2023., 1 Online-Ressource(XVI, 429 p. 303 illus., 271 illus. in color.) - (Advanced Structured Materials; 171), ISBN: 978-3-031-26466-5
Solid Mechanics, Theory of Elasticity and Creep
Altenbach, Holm; Mkhitaryan, Suren Manuk; Hakobyan, Vahram; Sahakyan, Avetik Varazdat
In: Cham: Springer, 2023, 1 Online-Ressource (XXII, 373 Seiten) - (Advanced structured materials; volume 185), ISBN: 978-3-031-18564-9
Advances in Mechanical and Power Engineering - selected papers from The International Conference on Advanced Mechanical and Power Engineering (CAMPE 2021), October 18-21, 2021
Altenbach, Holm; Cheng, A. H.-D.; Gao, Xiao-Wei; Kostikov, Аndrii; Kryllowicz, Wladyslaw; Lampart, Piotr; Popov, Viktor; Rusanov, Andrii; Syngellakis, Stavros
In: Cham: Springer Nature Switzerland AG, 2023, 1 Online-Ressource (XVI, 378 pages) - (Lecture notes in mechanical engineering), ISBN: 978-3-031-18487-1 Kongress: CAMPE 2021 14 Kharkiv, Ukraine 2021.10.18-21
Progress in continuum mechanics
Altenbach, Holm; Irschik, Hans; Porubov, Alexey
In: Cham: Imprint: Springer, 2023., 1 Online-Ressource - ( Advanced structured materials; 196), ISBN: 978-3-031-43736-6
Deformation and destruction of materials and structures under quasi-static and impulse loading
Altenbach, Holm; Eremeyev, Victor A.; Igumnov, Leonid A.; Bragov, Anatoly
In: Cham: Springer, 2023, 1 Online-Ressource - (Advanced structured materials$186), ISBN: 978-3-031-22093-7
Advances in mechanics of time-dependent materials
Altenbach, Holm; Kaplunov, Julius; Lu, Hongbing; Nakada, Masayuki
In: Cham: Springer Nature, 2023, 1 Online-Ressource (XIV, 247 Seiten) - (Advanced structured materials; volume 188), ISBN: 978-3-031-22401-0
Textbook
Ebene Flächentragwerke - Grundlagen der Modellierung und Berechnung von Scheiben und Platten
Altenbach, Holm; Altenbach, Johannes; Naumenko, Konstantin
In: [Heidelberg]: Springer Vieweg, 2023, 1 Online-Ressource (xvi, 581 Seiten, 174 Abb., 53 Abb. in Farbe), ISBN: 978-3-662-68391-0
Dissertation
Beitrag zur großserientauglichen Fertigung von thermoplastischen endlosfaserverstärkten Sandwichbauteilen
Gläßer, Thomas; Altenbach, Holm
In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2023, 1 Online-Ressource (XI, 125 Blätter, 5, 99 MB) [Literaturverzeichnis: Blatt 108-112][Literaturverzeichnis: Blatt 108-112]
Scientific monograph
Technische Mechanik Technische Mechanik Festigkeitslehre
Altenbach, Holm
In: [Heidelberg]: Springer Vieweg, 2022, xii, 434 Seiten - (Lehrbuch), ISBN: 3-658-41028-0 [Literaturverzeichnis: Seite 425-428]
Advances in Linear and Nonlinear Continuum and Structural Mechanics
Altenbach, Holm; Eremeyev, Victor
In: Cham: Imprint: Springer, 2023., 1 Online-Ressource(XXIII, 590 p. 225 illus., 145 illus. in color.) - (Advanced Structured Materials; 198), ISBN: 978-3-031-43210-1
2022
Book chapter
Preface
Altenbach, Holm; Beitelschmidt, Michael; Kästner, Markus; Naumenko, Konstantin; Wallmersperger, Thomas
In: Material modeling and structural mechanics - Cham : Springer International Publishing ; Altenbach, Holm . - 2022, S. vii-xi - (Advanced Structured Materials; 161)
Preface
Altenbach, Holm; Beitelschmidt, Michael; Kästner, Markus; Naumenko, Konstantin; Wallmersperger, Thomas
In: Material modeling and structural mechanics - Cham : Springer ; Altenbach, Holm *1956-* . - 2022, S. vii-xi
Influence of thermal stabilisation on the thermal regime in the strapdown inertial navigation system
Pogorilov, Sergiy Yu.; Khavin, Valeriy L.; Naumenko, Konstantin; Altenbach, Holm
In: Material Modeling and Structural Mechanics , 1st ed. 2022. - Cham : Springer International Publishing ; Altenbach, Holm, S. 177-188 - (Advanced structured materials; volume 161)
Untersuchungen zur Ermittlung der zyklischen Kennwerte von dünnem Elektroblech im Rahmen der rechnerischen Lebensdauerabschätzung
Kubaschinski, P.; Baruth, A.; Tetzlaff, U.; Altenbach, Holm; Waltz, M.
In: Betriebsfestigkeit - Wissensmanagement und Methodenentwicklung entlang der Wertschöpfungskette / Deutscher Verband für Materialforschung und -prüfung , 2022 - Berlin : Deutscher Verband für Materialforschung und -prüfung e.V., S. 163-178 [Tagung: 48. Tagung des DVM-Arbeitskreises Betriebsfestigkeit, Plauen, 12. und 13. Oktober 2022]
Modeling the slow crack growth of an edge crack within the cohesive zone model approach
Selivanov, Mikhailo; Nazarenko, Lidiia; Altenbach, Holm
In: Theoretical analyses, computations, and experiments of multiscale materials - a tribute to Francesco dellIsola - Cham : Springer International Publishing ; Giorgio, Ivan . - 2022, S. 505-535 - (advanced structured materials; volume 175)
The use of the homogenization method in the analysis of anisotropic creep in metal-matrix composites
Altenbach, Holm; Lvov, Gennady; Lvov, Ivan; Morachkovsky, Oleg
In: Material Modeling and Structural Mechanics , 1st ed. 2022. - Cham : Springer International Publishing ; Altenbach, Holm, S. 1-18 - (Advanced structured materials; volume 161)
Modeling the inelastic behavior of high-temperature steels using a two-time-scale approach
Knape, Katharina; Altenbach, Holm
In: Lectures notes on advanced structured materials - Cham : Springer International Publishing ; Altenbach, Holm *1956-* . - 2022, S. 357-367 - (Advanced structured materials; volume 153)
Preface
Altenbach, Holm; Bauer, Svetlana M.; Belyaev, Alexander K.; Indeitsev, Dmitri A.; Matveenko, Valery P.; Petrov, Yuri V.
In: Advances in solid and fracture mechanics - Springer ; Altenbach, Holm *1956-* . - 2022, S. v-xii - (Advanced structured materials; volume 180)
General forms of limit surface - application for isotropic materials
Altenbach, Holm; Kolupaev, Vladimir A.
In: Material Modeling and Structural Mechanics , 1st ed. 2022. - Cham : Springer International Publishing ; Altenbach, Holm, S. 19-94 - (Advanced structured materials; volume 161)
Stress distribution at the wavy surface of a solid incorporating surface stresses and surface tension
Kostyrko, Sergey; Altenbach, Holm; Grekov, Mikhail
In: Advances in solid and fracture mechanics - Springer ; Altenbach, Holm *1956-* . - 2022, S. 151-166 - (Advanced structured materials; volume 180)
Composite mechanics
Altenbach, Holm
In: Lectures notes on advanced structured materials - Cham : Springer International Publishing ; Altenbach, Holm *1956-* . - 2022, S. 3-27 - (Advanced structured materials; volume 153)
Peer-reviewed journal article
Some analytical solutions to peridynamic beam equations
Yang, Zhenghao; Naumenko, Konstantin; Altenbach, Holm; Ma, Chien-Ching; Oterkus, Erkan; Oterkus, Selda
In: ZAMM - Berlin : Wiley-VCH, Bd. 102 (2022), Heft 10, Artikel e202200132, insges. 16 S.
Analytical solution of 1-dimensional peridynamic equation of motion
Yang, Zhenghao; Ma, Chien-Ching; Oterkus, Erkan; Oterkus, Selda; Naumenko, Konstantin
In: Journal of peridynamics and nonlocal modeling - [Cham] : Springer International Publishing, Bd. 5 (2023), Heft 3, S. 356-374
Damage patterns in float glass plates - experiments and peridynamics analysis
Naumenko, Konstantin; Pander, Matthias; Würkner, Mathias
In: Theoretical and applied fracture mechanics - Amsterdam : North-Holland, Bd. 118 (2022), Artikel 103264
Beam buckling analysis in peridynamic framework
Yang, Zhenghao; Naumenko, Konstantin; Altenbach, Holm; Ma, Chien-Ching; Oterkus, Erkan; Oterkus, Selda
In: Archive of applied mechanics - Berlin : Springer, Bd. 92 (2022), Heft 12, S. 3503-3514
Strength analysis of laminated glass/EVA interfaces - microstructure, peel force and energy of adhesion
Bornemann, Steffen; Henning, Sven; Naumenko, Konstantin; Pander, Matthias; Thavayogarajah, Nishanth; Würkner, Mathias
In: Composite structures - Amsterdam : Elsevier, Bd. 297 (2022), Artikel 115940
Elastic plate under low velocity impact: Classical continuum mechanics vs peridynamics analysis
Altenbach, Holm; Larin, Oleksiy; Naumenko, Konstantin; Sukhanova, Olha; Würkner, Mathias
In: AIMS Materials Science - Springfield, Mo. : AIMS Press, Bd. 9 (2022), Heft 5, S. 702-718
A non-linear direct peridynamics plate theory
Naumenko, Konstantin; Eremeyev, Victor A.
In: Composite structures - Amsterdam : Elsevier, Bd. 279 (2022), Artikel 114728
Analytical solution of the peridynamic equation of motion for a 2-dimensional rectangular membrane
Yang, Zhenghao; Ma, Chien-Ching; Oterkus, Erkan; Oterkus, Selda; Naumenko, Konstantin; Vazic, Bozo
In: Journal of peridynamics and nonlocal modeling - [Cham] : Springer International Publishing, Bd. 5 (2023), Heft 3, S. 375-391
Some closed form series solutions to peridynamic plate equations
Yang, Zhenghao; Naumenko, Konstantin; Ma, Chien-Ching; Altenbach, Holm; Oterkus, Erkan; Oterkus, Selda
In: Mechanics research communications - Amsterdam [u.a.] : Elsevier, Bd. 126 (2022), Artikel 104000
Minimization of thermal stress in perforated composite plate using metaheuristic algorithms WOA, SCA and GA
Jafari, Mohammad; Hossein Bayati Chaleshtari, Mohammad; Khoramishad, Hadi; Altenbach, Holm
In: Composite structures - Amsterdam : Elsevier, Bd. 304 (2022), Heft Part 2, Artikel 116403
O nekotorych kriterijach predelʹnogo sostojanija v mechanike tvergogo tela
Altenbach, Holm
In: Prikladnaja matematika i mechanika - Moskva : Izdatelʹstvo "Nauka", Bd. 86 (2022), Heft 4, S. 477-487
Analysis of the negative impacts of coffee husk on the local environment of Ethiopia
Tolessa Amena, Berhanu; Altenbach, Holm; Shunki Tibba, Getachew; Lemu, Hirpa G.
In: European Chemical Bulletin - Budapest : [Verlag nicht ermittelbar], Bd. 11 (2022), Heft 11, S. 18-26
On analytical estimates of the effective elastic properties of polycrystalline silicon
Aßmus, Marcus; Altenbach, Holm
In: Vestnik Sankt-Peterburgskogo Universiteta / 1 / Sankt-Peterburgskij gosudarstvennyj universitet - Sankt Peterburg : Univ., Bd. 9 (2022), Heft 3, S. 440-451
Investigation of mechanical properties of coffee Husk-HDPE-ABS polymer composite using injection-molding method
Tolessa Amena, Berhanu; Altenbach, Holm; Shunki Tibba, Getechew; Hossain, Nazia
In: Journal of composites science - Basel : MDPI, Bd. 6 (2022), Heft 12, Artikel 354, insges. 13 S.
Solution of variable-order partial integro-differential equation using Legendre wavelet approximation and operational matrices
Biswas, Chetna; Das, Subir; Singh, Anup; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH, Bd. 103 (2023), Heft 2, Artikel e202200222, insges. 16 S.
Calibration of a combined isotropic-kinematic hardening material model for the simulation of thin electrical steel sheets subjected to cyclic loading - Kalibrierung eines Materialmodells für die Simulation von zyklisch beanspruchten dünnen Elektroblechen unter Berücksichtigung kombinierter isotroper-kinematischer Verfestigung
Kubaschinski, P.; Gottwalt, A.; Tetzlaff, U.; Altenbach, Holm; Waltz, M.
In: Materials science and engineering technology - Weinheim : Wiley-VCH, Bd. 53 (2022), Heft 4, S. 422-439
Multilayered frame structure subjected to non-linear creep - a delamination analysis
Rizov, Victor I.; Altenbach, Holm
In: Coupled systems mechanics - Daejeon : Techno-Press, Bd. 11 (2022), Heft 3, S. 217-231
Physico-chemical characterization of alkali-treated Ethiopian Arabica coffee husk fiber for composite materials production
Amena, Berhanu Tolessa; Altenbach, Holm; Tibba, Getechew Shunki; Hossain, Nazia
In: Journal of composites science - Basel : MDPI, Bd. 6 (2022), Heft 8, Artikel 233, insges. 10 S.
Efficient free vibration analysis of FGM sandwich flat panels with conventional shell elements
Burlayenko, Vyacheslav N.; Sadowski, Tomasz; Altenbach, Holm
In: Mechanics of advanced materials and structures - London : Taylor & Francis, Bd. 29 (2022), Heft 25, S. 3709-3726
Multi-layered non-linear viscoelastic beams subjected to torsion at a constant speed - a delamination analysis
Rizov, Victor; Altenbach, Holm
In: Engineering transactions - Warszawa : Polish Scientific Publ., Bd. 70 (2022), Heft 1, S. 53-66
On the optical thermography in selective laser melting process
Tomas, Josef; Markus, Merkel; Altenbach, Holm
In: Mechanics of solids - New York, NY : Allerton, Bd. 57 (2022), Heft 3, S. 597-603
On variational principles in coupled strain-gradient elasticity
Nazarenko, Lidiia; Glüge, Rainer; Altenbach, Holm
In: Mathematics and mechanics of solids - Thousand Oaks, Calif. [u.a.] : Sage, Bd. 27 (2022), Heft 10, S. 2256-2274
On the elastic wedge problem within simplified and incomplete strain gradient elasticity theories
Solyaev, Yury; Lurie, Sergey; Altenbach, Holm; dellIsolad, Francesco
In: International journal of solids and structures - New York, NY [u.a.] : Elsevier, Bd. 239-240 (2022), Artikel 111433
On weak solutions of boundary values problem in the theory of Cosserat porous bodies
Marin, Marin; Altenbach, Holm; Abbas, Ibrahim
In: ZAMM - Berlin : Wiley-VCH, Bd. 103 (2023), Heft 6, Artikel 202200164, insges. 9 S.
Shrinkage simulation of blow molded parts using viscoelastic material models - Schwindungssimulation blasgeformter Bauteile unter Verwendung viskoelastischer Materialmodelle
Michels, Patrick; Bruch, O.; Evers-Dietze, Bernd; Grotenburg, D.; Ramakers-van Dorp, Esther; Altenbach, Holm
In: Materials science and engineering technology - Weinheim : Wiley-VCH, Bd. 53 (2022), Heft 4, S. 449-466
Utilization of coffee husk as an alternative source - a current trend
Tolessa, Berhanu; Altenbach, Holm; Tibba, Getachew Shunki; Singh, Balkeshwar
In: Tierärztliche Praxis - Stuttgart : Schattauer, Bd. 42 (2022), Heft 1, S. 18-30
Generalized continua with applications
Altenbach, Holm; Eremeyev, Victor A.
In: Continuum mechanics and thermodynamics - Berlin : Springer, Bd. 34 (2022), Heft 4, S. 893-894
Interaction among offset parallel cracks in an orthotropic plane under thermo-mechanical loading
Tanwar, Anshika; Singh, Ritika; Das, Subir; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH, Bd. 102 (2022), Heft 7, Artikel e202100593, insges. 14 S.
Delamination of multilayered inhomogeneous beams under nonlinear creep
Rizov, Victor; Altenbach, Holm
In: Journal of applied mechanics and technical physics - New York, NY [u.a.] : Consultants Bureau, Bd. 63 (2022), Heft 5, S. 860-868
Dissertation
Identification of non-local force interactions in self-adhesive polymeric films
Bagheri, Behnaz; Naumenko, Konstantin
In: Magdeburg: Universitätsbibliothek, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2022, 1 Online-Ressource (ix, 96 Blätter, 96,02 MB) [Literaturverzeichnis: Blatt 87-96][Literaturverzeichnis: Blatt 87-96]
Editor
Material Modeling and Structural Mechanics
Altenbach, Holm; Beitelschmidt, Michael; Kästner, Markus; Naumenko, Konstantin; Wallmersperger, Thomas
In: Cham: Imprint: Springer, 2022., 1 Online-Ressource(XXII, 336 p. 163 illus., 131 illus. in color.) - (Advanced Structured Materials; 161; Springer eBook Collection), ISBN: 978-3-030-97675-0
Lectures notes on advanced structured materials
Altenbach, Holm; Johlitz, Michael; Merkel, Markus; Öchsner, Andreas
In: Cham: Springer International Publishing, 2022, 1 Online-Ressource - ( Advanced structured materials; volume 153), ISBN: 978-3-031-11589-9
Theoretical analyses, computations, and experiments of multiscale materials - a tribute to Francesco dell’Isola
Giorgio, Ivan; Placidi, Luca; Barchiesi, Emilio; Abali, Bilen Emek; Altenbach, Holm; Dell'Isola, Francesco
In: Cham: Imprint: Springer, 2022., 1 Online-Ressource (XLIX, 707 Seiten) - (Advanced structured materials; volume 175), ISBN: 978-3-031-04548-6
Advanced materials modelling for mechanical, medical and biological applications
Altenbach, Holm; Eremeyev, Victor A.; Galybin, Alexander; Vasilʹev, Andrej V.
In: Cham: Springer, 2022, 1 Online-Ressource (XXI, 466 Seiten) - (Advanced Structured Materials; volume 155), ISBN: 978-3-030-81705-3
Advances in solid and fracture mechanics - a liber amicorum to celebrate the birthday of Nikita Morozov
Altenbach, Holm; Bauer, Svetlana M.; Belyaev, Alexander K.; Indeitsev, Dmitri A.; Matveenko, Valery P.; Petrov, Yuri V.
In: Springer, 2022, 1 Online-Ressource - ( Advanced structured materials; volume 180), ISBN: 978-3-031-18393-5
Recent approaches in the theory of plates and plate-like structures
Altenbach, Holm; Bauer, Svetlana; Eremeyev, Victor; Mikhasev, Gennadi I.; Morozov, Nikita F.
In: Springer International Publishing, 2022, 1 Online-Ressource (XXVI, 306 Seiten) - (Advanced structured materials; 151; Springer eBook Collection), ISBN: 978-3-030-87185-7
Advanced theories for deformation, damage and failure in materials
Altenbach, Holm; Ganczarski, Artur
In: Cham: Springer, 2023, 1 Online-Ressource - (CISM courses and lectures; volume 605), ISBN: 978-3-031-04354-3 Kongress: Course Advanced Theories for Deformation, Damage and Failure in Materials Online 2020.05.04-08
Engineering design applications IV - structures, materials and processes
Öchsner, Andreas; Altenbach, Holm
In: Cham: Springer International Publishing, 2022, 1 Online-Ressource (XIII, 250 pages) - (Advanced structured materials; volume 172), ISBN: 978-3-030-97925-6
Habilitation
Charakterisierung von polymeren Peelsystemen durch Anwendung neuartiger Methoden der experimentellen Bruchmechanik
Nase, Michael; Altenbach, Holm
In: Düren: Shaker Verlag, Habilitationsschrift Otto-von-Guericke-Universität Magdeburg 2022, XI, 163 Seiten - (Berichte aus der Kunststofftechnik), ISBN: 3-8440-8635-8 [Literaturverzeichnis: Seite 152-163][Literaturverzeichnis: Seite 152-163]
2021
Book chapter
Dynamics of curved laminated glass composite panels under impact loading
Sukhanova, Olha; Larin, Oleksiy; Naumenko, Konstantin; Altenbach, Holm
In: Nonlinear mechanics of complex structures - from theory to engineering applications , 1st ed. 2021. - Cham : Springer International Publishing ; Altenbach, Holm, S. 91-101 - ( Advanced structured materials; volume 157)
Preface
Altenbach, Holm; Eremeyev, Victor A.; Igumnov, Leonid A.
In: Multiscale solid mechanics - Cham : Springer ; Altenbach, Holm *1956-* . - 2021, S. v-vi
On the principles to derive plate theories
Aßmus, Marcus; Altenbach, Holm
In: Modern trends in structural and solid mechanics ; 2: Vibrations - London : ISTE ; Challamel, Noël . - 2021, insges. 14 S.
On dynamic optimality of anti-sandwiches
Aßmus, Marcus; Altenbach, Holm
In: Dynamics and Control of Advanced Structures and Machines - Cham : Springer ; Irschik, Hans . - 2021, S. 1-11 - (Advanced Structured Materials; volumes 156) [Workshop: 4th International Workshop on Advanced Dynamics and Model, Linz, Austria, 2019]
A material model-based finite element free vibration analysis of one-, two- and three-dimensional axially FGM beams
Burlayenko, Vyacheslav N.; Altenbach, Holm; Dimitrova, Svetlana D.
In: 2021 IEEE 2nd KhPI Week on Advanced Technology (KhPI Week) / IEEE KhPI Week on Advanced Technology , 2021 - [Piscataway, NJ] : IEEE, S. 628-633 [Konferenz: 2021 IEEE 2nd KhPI Week on Advanced Technology (KhPIWeek), Kharkiv, Ukraine, 13.-17. September 2021]
Debonding resistance evaluation in virtual testing of sandwich specimens
Burlayenko, Vyacheslav N.; Altenbach, Holm; Dimitrova, Svetlana D.
In: Nonlinear mechanics of complex structures - from theory to engineering applications , 1st ed. 2021. - Cham : Springer International Publishing ; Altenbach, Holm, S. 19-38 - ( Advanced structured materials; volume 157)
Peer-reviewed journal article
Inelastic behavior of polyoxymethylene for wide strain rate and temperature ranges - constitutive modeling and identification
Filanova, Yevgeniya; Hauptmann, Johannes; Längler, Frank; Naumenko, Konstantin
In: Materials - Basel : MDPI, Bd. 14 (2021), Heft 13, Artikel 3667, insges. 17 S.
Temperature resistance of Mo3Si - phase stability, microhardness, and creep properties
Kauss, Olha; Obert, Susanne; Bogomol, Iurii; Wablat, Thomas; Siemensmeyer, Nils; Naumenko, Konstantin; Krüger, Manja
In: Metals - Basel : MDPI, Bd. 11 (2021), Heft 4, Artikel 564, insges. 17 S.
Experimental analysis and constitutive modeling of anisotropic creep damage in a wrought age-hardenable Al alloy
Naumenko, Konstantin; Gariboldi, Elisabetta
In: Engineering fracture mechanics - Kidlington : Elsevier Science, Bd. 259 (2022), Artikel 108119
Closed-form quaternion representations for rigid body rotation - application to error assessment in orientation algorithms of strapdown inertial navigation systems
Plaksiy, Yuriy; Breslavsky, Dmitriy; Homozkova, Irina; Naumenko, Konstantin
In: Continuum mechanics and thermodynamics - Berlin : Springer, Bd. 33 (2021), Heft 4, S. 1141-1160
Uniqueness theorem in coupled strain gradient elasticity with mixed boundary conditions
Nazarenko, Lidiia; Glüge, Rainer; Altenbach, Holm
In: Continuum mechanics and thermodynamics - Berlin : Springer, Bd. 34 (2022), Heft 1, S. 93-106
Rheological modeling in solid mechanics from the beginning up to now
Altenbach, Holm; Eisenträger, Johanna
In: Lecture notes of TICMI / Tbilisi International Centre of Mathematics and Informatics - Tbilisi : Univ. Press, Bd. 22 (2021), S. 13-29
Positive definiteness in coupled strain gradient elasticity
Nazarenko, Lidiia; Glüge, Rainer; Altenbach, Holm
In: Continuum mechanics and thermodynamics - Berlin : Springer, Bd. 33 (2021), S. 713-725
Destruction of PMMA after the irradiation with high-energy electrons and a mechanical point impact
Kozhamkulov, B.; Kadyrakunov, K.; Jumadillayev, K.; Primkulova, Zh.; Altenbach, Holm
In: Mechanics of composite materials - Dordrecht [u.a.] : Springer Science + Business Media B.V, Bd. 56 (2021), S. 817-824
Generalized Brinkman-type fluid model and coupled heat conductivity problem
Belov, P. A.; Altenbach, Holm; Lurie, S. A.; Nazarenko, Lidiia; Kriven, G. I.
In: Lobachevskii journal of mathematics - [Moskva] : Russian Acad. of Sciences [u.a.], Bd. 42 (2021), Heft 8, S. 1786-1799
Study of collinear cracks in a composite medium subjected to time‐harmonic wave disturbance
Trivedi, Neha; Das, Subir; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH, Bd. 101 (2021), Heft 6, Artikel e202000307
Locally-synchronous, iterative solver for Fourier-based homogenization
Glüge, R.; Altenbach, Holm; Eisenträger, Sascha
In: Computational mechanics - Berlin : Springer, Bd. 68 (2021), Heft 3, S. 599-618
Effective properties of particulate nano-composites including Steigmann-Ogden model of material surface
Nazarenko, Lidiia; Stolarski, Henryk; Altenbach, Holm
In: Computational mechanics - Berlin : Springer, Bd. 68 (2021), Heft 3, S. 651-665
Coupled effect of curved surface and interface on stress state of wrinkled thin film coating at the nanoscale
Kostyrko, Sergey; Grekov, Mikhail; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH, Bd. 101 (2021), Heft 8, Artikel e202000202
Numerical simulation of the fused deposition modeling for the manufacturing of parts with both high geometric fidelity and mechanical quality
Altenbach, Holm; Janiga, Gábor; Beiner, Mario; Androsch, Rene; Runge, Paul-Maximilian
In: Žurnal Sibirskogo Federalʹnogo Universiteta / Serija Matematika i fizika / Sibirskij Federalʹnyj Universitet - Krasnojarsk : [Verlag nicht ermittelbar], Bd. 14 (2021), Heft 6, S. 712-725
Transversely isotropic visco-thermo-elastic nanobeam with time harmonic laser pulse and new modified three phase lag Green-Nagdhi model
Kaur, Iqbal; Singh, Kulvinder; Craciun, Eduard-Marius; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH, Bd. 102 (2022), Heft 4, Artikel e202100263
Evolution of the stiffness tetrad in fiber-reinforced materials under large plastic strain - material plasticity
Weber, Martin; Glüge, Rainer; Altenbach, Holm
In: Archive of applied mechanics - Berlin : Springer, Bd. 91 (2021), S. 1371-1390
Framework for modelling the elastoplastic behaviour of friction welded lightweight structures under tension
Heppner, Eric; Glüge, Rainer; Weber, Martin; Woschke, Elmar
In: Proceedings in applied mathematics and mechanics - Weinheim [u.a.] : Wiley-VCH, Bd. 20 (2021), Heft 1, Artikel e202000262, insges. 2 S. [Special Issue: 91st Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM)]
2020
Book chapter
Heat transfer analysis in the strapdown inertial unit of the navigation system
Pogorilov, Sergiy Yu.; Khavin, Valeriy L.; Naumenko, Konstantin; Schastlivets, Kyrill Yu.
In: Plasticity, damage and fracture in advanced materials - Cham : Springer ; Altenbach, Holm . - 2020, S. 119-133
Laminated plates with non-linear visco-elastic interlayer - the governing equations
Naumenko, Konstantin; Altenbach, Holm
In: Analysis of shells, plates, and beams - Cham : Springer ; Altenbach, Holm . - 2020, S. 297-310 - (Advanced structured materials; volume 134)
Cohesive zone models-theory, numerics and usage in high-temperature applications to describe cracking and delamination
Nordmann, Joachim; Naumenko, Konstantin; Altenbach, Holm
In: Advances in mechanics of high-temperature materials - Cham : Springer . - 2019, S. 131-168 - (Advanced structured materials; 117)
Structural analysis of gas turbine blades made of Mo-Si-B under stationary thermo-mechanical loads
Kauss, Olha; Naumenko, Konstantin; Hasemann, Georg; Krüger, Manja
In: Advances in mechanics of high-temperature materials - Cham : Springer . - 2020, S. 79-91 - (Advanced structured materials; 117)
Analysis of a power plant rotor made of tempered martensitic steel based on a composite model of inelastic deformation
Eisenträger, Johanna; Naumenko, Konstantin; Kostenko, Yevgen; Altenbach, Holm
In: Advances in mechanics of high-temperature materials - Cham : Springer . - 2020, S. 1-34 - (Advanced structured materials; 117)
Peer-reviewed journal article
A direct approach to evaluate interaction forces between self-adhesive polymeric films subjected to T-peeling
Naumenko, Konstantin; Bagheri, Behnaz
In: Archive of applied mechanics - Berlin : Springer, Bd. 91 (2021), S. 629-641
Stress-regime-dependence of inelastic anisotropy in forged age-hardening aluminium alloys at elevated temperature - constitutive modeling, identification and validation
Naumenko, Konstantin; Gariboldi, Elisabetta; Nizinkovskyi, Rostyslav
In: Mechanics of materials - Amsterdam : Elsevier - Volume 141(2020), Article 103262
Dissertation
Material plasticity - evolution of the stiffness tetrad in fiber materials with large plastic strain
Weber, Martin; Altenbach, Holm
In: Magdeburg, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2020, XV, 308 Seiten [Literaturverzeichnis: Seite 101-109][Literaturverzeichnis: Seite 101-109]
2019
Book chapter
A damage mechanics based cohesive zone model with damage gradient extension for creep-fatigue-interaction
Nordmann, Joachim; Naumenko, Konstantin; Altenbach, Holm
In: Key engineering materials - Uetikon a.S. : Trans Tech Publications, Bd. 794 (2019), S. 253-259
Subclasses of mechanical problems arising from the direct approach for homogeneous Plates
Aßmus, Marcus; Naumenko, Konstantin; Altenbach, Holm
In: Recent developments in the theory of shells - Springer International Publishing . - 2019, S. 43-63 - (Advanced Structured Materials; 110)
Peer-reviewed journal article
A generalized framework towards structural mechanics of three-layered composite structures
Aßmus, Marcus; Naumenko, Konstantin; Öchsner, Andreas; Eremeyev, Victor; Altenbach, Holm
In: Technische Mechanik - Magdeburg : Inst., Bd. 39 (2019), Heft 2, S. 202-219
The problems of transient heat transfer of electroconductive bodies in the electromagnetic field
Altenbach, Holm; Naumenko, Konstantin; Lavinsky, Denis; Konkin, Valerii
In: Visnyk Nacionalʹnoho techničnoho universytetu "ChPI" - Charkiv : NTU "ChPI", Bd. 1 (2019), Heft 2, S. 9-13
Numerical analysis of a steam turbine rotor subjected to thermo-mechanical cyclic loads
Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm
In: Technische Mechanik - Magdeburg : Inst., Bd. 39 (2019), Heft 3, S. 261-281
Thermomechanical analysis of a steam turbine rotor
Eisenträger, Johanna; Naumenko, Konstantin; Kostenko, Yevgen; Altenbach, Holm
In: Proceedings in applied mathematics and mechanics - Weinheim [u.a.] : Wiley-VCH - Volume 19, issue 1 (2019), article e201900361 [Special Issue: 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM)]
Structural analysis of gas turbine blades made of Mo-Si-B under transient thermo-mechanical loads
Kauss, Olha; Tsybenko, H.; Naumenko, Konstantin; Hütter, Sebastian; Krüger, Manja
In: Computational materials science - Amsterdam [u.a.] : Elsevier Science, Bd. 165 (2019), S. 129-136
On thermal strains and residual stresses in the linear theory of anti‐sandwiches
Javanbakht, Zia; Aßmus, Marcus; Naumenko, Konstantin; Öchsner, Andreas; Altenbach, Holm
In: ZAMM - Berlin : Wiley-VCH - Volume 99, issue 8 (2019), Article e2019000062, insgesamt 17 Seiten
The potential of mechanical alloying to improve the strength and ductility of Mo-9Si-8B-1Zr alloys - experiments and simulation
Krüger, Manja; Kauss, Olha; Naumenko, Konstantin; Burmeister, C.; Wessel, E.; Schmelzer, Janett
In: Intermetallics - Amsterdam [u.a.] : Elsevier Science - Vol. 113 (2019), Artikel 106558
Identification of traction-separation curves for self-adhesive polymeric films based on non-linear theory of beams and digital images of T-peeling
Bagheri, Behnaz; Schulze, Stefan-H.; Naumenko, Konstantin; Altenbach, Holm
In: Composite structures - Amsterdam : Elsevier, Bd. 216 (2019), S. 222-227
Distance of a stiffness tetrad to the symmetry classes of linear elasticity
Weber, Martin; Glüge, Rainer; Bertram, Albrecht
In: International journal of solids and structures - New York, NY [u.a.] : Elsevier, Bd. 156/157 (2019), S. 281-293
Editor
Advances in mechanics of high-temperature materials
Naumenko, Konstantin; Krüger, Manja
In: Cham: Springer, 2019, 1 Online-Ressource - (Advanced structured materials; 117), ISBN: 978-3-030-23869-8
Scientific monograph
Modeling High Temperature Materials Behavior for Structural Analysis. Part 2: Solution procedures and structural analysis examples
Naumenko, Konstantin; Altenbach, Holm
In: Cham: Springer, 2019, 1 Online-Ressource - (Advanced structured materials; 112), ISBN: 978-3-030-20381-8
2018
Book chapter
Angular velocities, twirls, spins and rotation tensors in the continuum mechanics revisited
Naumenko, Konstantin; Altenbach, Holm
In: Generalized Models and Non-classical Approaches in Complex Materials 1 - Cham : Springer International Publishing . - 2018, S. 621-632 - (Advanced Structured Materials; 89)
Peer-reviewed journal article
Adaption of a Carreau fluid law formulation for residual stress determination in rotary friction welds
Rößler, Christoph; Schmicker, David; Naumenko, Konstantin; Woschke, Elmar
In: Journal of materials processing technology - Amsterdam [u.a.] : Elsevier, Bd. 252 (2018), S. 567-572
Verformungsanalyse elektrisch leitender metallischer Bauteile bei Magnetimpulsbearbeitung
Altenbach, Holm; Konkin, Valery; Lavinsky, Denis; Morachkovsky, Oleg; Naumenko, Konstantin
In: Forschung im Ingenieurwesen - Berlin : Springer . - 2018 [Online first]
Calibration of a phase mixture model for hardening and softening regimes in tempered martensitic steel over wide stress and temperature ranges
Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm
In: The journal of strain analysis for engineering design - London : Sage Publ., Bd. 53 (2018), Heft 3, S. 156-177
Numerical implementation of a phase mixture model for rate-dependent inelasticity of tempered martensitic steels
Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm
In: Acta mechanica - Wien : Springer, Bd. 229 (2018), Heft 7, S. 3051-3068
Analysis of iron aluminide coated beams under creep conditions in high-temperature four-point bending tests
Nordmann, Joachim; Thiem, Philipp; Cinca, Nuria; Naumenko, Konstantin; Krüger, Manja
In: The journal of strain analysis for engineering design - London : Sage Publ., Bd. 53 (2018), Heft 4, S. 255-265
Mechanical models and finite-element approaches for the structural analysis of photovoltaic composite structures - a comparative study
Haghi, M.; Aßmus, Marcus; Naumenko, Konstantin; Altenbach, Holm
In: Mechanics of composite materials - Dordrecht [u.a.] : Springer Science + Business Media B.V, Bd. 54 (2018), Heft 4, S. 415-430
Two-time-scales and time-averaging approaches for the analysis of cyclic creep based on ArmstrongFrederick type constitutive model
Altenbach, Holm; Breslavsky, Dmitry; Naumenko, Konstantin; Tatarinova, Oksana
In: Proceedings of the Institution of Mechanical Engineers. Part C, Journal of mechanical engineering science - London : Sage Publ. . - 2018 [Online first]
Dissertation
Modeling inelastic behaviour of Al-rich Ti-Al alloys at ultra-high homologous temperature
Chowdhury, Helal; Naumenko, Konstantin; Krüger, Manja
In: Barleben: docupoint Verlag, Dissertation Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau 2018, 153 Seiten - (Micro-macro transactions; Volume 30; Docupoint Wissenschaft), ISBN: 978-3-86912-145-1
Editor
Advances in mechanics of materials and structural analysis - in honor of Reinhold Kienzler
Altenbach, Holm; Jablonski, Frank; Müller, Wolfgang H.; Naumenko, Konstantin; Schneider, Patrick; Kienzler, Reinhold
In: [s.l.]: Springer-Verlag, 2018, 1 Online-Ressource (PDF, 19415 KB, 461 S.), ISBN: 3-319-70562-8
2017
Abstract
Creep properties of the Mo3Si and Mo5SiB2 phases in the Mo-Si-B alloy system
Popovych, Olha; Bogomol, Iurii; Naumenko, Konstantin; Krüger, Manja
In: Intermetallics 2017 - Bad Staffelstein : Educational Center Kloster Banz, S. 115-116 [Konferenz: Intermetallics 2017]
Book chapter
Consideration of non-uniform and non-orthogonal mechanical loads for structural analysis of photovoltaic composite structures
Aßmus, Marcus; Bergmann, Stefan; Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm
In: Mechanics for materials and technologies - Cham, Switzerland : Springer International Publishing ; Altenbach, Holm *1956-* . - 2017, S. 73-122 - (Advanced structured materials; Volume 46)
Prediction of stress relaxation in power plant components based on a constitutive model
Kostenko, Yevgen; Naumenko, Konstantin
In: Proceedings of the ASME Turbo Expo: Turbomachinery Technical Conference and Exposition, Volume 8: Microturbines, Turbochargers and Small Turbomachines; Steam Turbines - New York, N.Y : American Society of Mechanical Engineers - 2017, Paper No. GT2017-63608, S. V008T29A017, insgesamt 8 S. [Konferenz: ASME Turbo Expo 2017, Charlotte, North Carolina, USA, 26-30 June, 2017]
On the models of three-layered plates and shells with thin soft core
Eremeyev, Viktor. A.; Naumenko, Konstantin
In: Wave Dynamics and Composite Mechanics for Microstructured Materials and Metamaterials - Singapore : Springer . - 2017, S. 159-171 - (Advanced Structured Materials; 59)
Kriechen von Mo-Si-B-Legierungen und Simulation der Kriechverformung von Turbinenschaufeln
Popovych, Olha; Naumenko, Konstantin; Krüger, Manja
In: 16. Sommerkurs Werkstoffe und Fügen - Magdeburg, 08. und 09. September 2017 , korrigierte Auflage - Magdeburg : Universitätsbibliothek, S. 185-192
Fracture mechanics characterisation of peelfilms
Nase, M.; Rennert, M.; Henning, S.; Zankel, A.; Naumenko, Konstantin; Grellmann, W.
In: Deformation and fracture behaviour of polymer materials , 1. Auflage - Cham : Springer-Verlag . - 2017, S. 271-281 - (Springer series in material science; 247)
Peer-reviewed journal article
Analysis of temperature and strain rate dependencies of softening regime for tempered martensitic steel
Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm; Gariboldi, Elisabetta
In: The journal of strain analysis for engineering design - London : Sage Publ. . - 2017
A layer-wise theory of shallow shells with thin soft core for laminated glass and photovoltaic applications
Naumenko, Konstantin; Eremeyev, Viktor A.
In: Composite structures - Amsterdam : Elsevier, Bd. 178 (2017), S. 434-446
Critical stresses estimation by crystal viscoplasticity modeling of rate-dependent anisotropy of Al-rich TiAl alloys at high temperature
Chowdhury, Helal; Naumenko, Konstantin; Altenbach, Holm; Krüger, Manja
In: Archive of applied mechanics - Berlin : Springer, Bd. 88 (2018), Heft 1-2, S. 65-81
A homogeneous substitute material for the core layer of photovoltaic composite structures
Aßmus, Marcus; Nordmann, J.; Naumenko, Konstantin; Altenbach, Holm
In: Composites. Part B, Engineering - Amsterdam [u.a.] : Elsevier, Bd. 112 (2017), S. 353-372
Aspects of power law flow rules in crystal plasticity with glide-climb driven hardening and recovery
Chowdhury, H.; Naumenko, Konstantin; Altenbach, Holm
In: International journal of mechanical sciences - Amsterdam [u.a.] : Elsevier Science, Bd. 146-147 (2018), S. 486-496
Mechanical behaviour of photovoltaic composite structures - a parameter study on the influence of geometric dimensions and material properties under static loading
Aßmus, Marcus; Bergmann, Stefan; Naumenko, Konstantin; Altenbach, Holm
In: Composites communications - Amsterdam : Elsevier, Bd. 5 (2017), S. 23-26
Rate dependent tension-compression-asymmetry of Ti-61.8at%Al alloy with long period superstructures at 1050 °C
Chowdhury, Helal; Naumenko, Konstantin; Altenbach, Holm; Krüger, Manja
In: Materials science and engineering / A - Amsterdam : Elsevier, Bd. 700 (2017), S. 503-511
Reviewing the class of Al-rich Ti-Al alloys - modeling high temperature plastic anisotropy and asymmetry
Chowdhury, Helal; Altenbach, Holm; Krüger, Manja; Naumenko, Konstantin
In: Mechanics of advanced materials and modern processes - Berlin : Springer, Bd. 3 (2017), insges. 20 S.
Mechanical behaviour of photovoltaic composite structures - influence of geometric dimensions and material properties on the eigenfrequencies of mechanical vibrations
Aßmus, Marcus; Naumenko, Konstantin; Altenbach, Holm
In: Composites communications - Amsterdam : Elsevier, Bd. 6 (2017), S. 59-62
Material plasticity to track the elastic anisotropy at finite strains
Weber, Martin; Glüge, Rainer; Bertram, Albrecht
In: Proceedings in applied mathematics and mechanics - Weinheim [u.a.] : Wiley-VCH, Bd. 17 (2017), Heft 1, S. 481-482 [Special Issue: 88th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Weimar 2017]
Review
[Rezension von: Bobaru, Florin, Handbook of Peridynamic Modeling]
Naumenko, Konstantin; Bobaru, Florin
In: ZAMM - Berlin : Wiley-VCH , 1921, Bd. 97 (2017), Heft 5, S. 616
2016
Peer-reviewed journal article
Analysis of anisotropic damage in forged Al-Cu-Mg-Si alloy based on creep tests, micrographs of fractured specimen and digital image correlations
Gariboldi, Elisabetta; Naumenko, Konstantin; Ozhoga-Maslovskaja, Oksana; Zappa, Emanuele
In: Materials science & engineering - Amsterdam : Elsevier, Bd. 652 (2016), S. 175-185
A multiscale projection approach for the coupled global-local structural analysis of photovoltaic modules
Aßmus, Marcus; Naumenko, Konstantin; Altenbach, Holm
In: Composite structures - Amsterdam : Elsevier, Bd. 158 (2016), S. 340-358
Identifying tractionseparation behavior of self-adhesive polymeric films from in situ digital images under T-peeling
Nase, Michael; Rennert, Mirko; Naumenko, Konstantin; Eremeyev, Victor A.
In: Journal of the mechanics and physics of solids - Amsterdam [u.a.] : Elsevier Science, Bd. 91 (2016), S. 40-55
On the choice of the power law flow rule and its consequences in crystal plasticity
Chowdhury, Helal; Altenbach, Holm; Naumenko, Konstantin
In: Key engineering materials - Baech : Trans Tech Publications Ltd, Bd. 725 (2016), S. 359-365
Editor
Advanced Methods of Continuum Mechanics for Materials and Structures
Naumenko, Konstantin; Aßmus, Marcus
In: Singapore: Springer Singapore, 2016, 1 Online-Ressource (555 p) - (Advanced Structured Materials; 60), ISBN: 978-981-10-0959-4
Advanced Methods of Continuum Mechanics for Materials and Structures
Naumenko, Konstantin; Aßmus, Marcus
In: Singapore: Springer Singapore, 2016, Online-Ressource (XVII, 558 p. 194 illus., 118 illus. in color, online resource) - (Advanced Structured Materials; 60; SpringerLink; Bücher), ISBN: 978-981-10-0959-4
Textbook
Ebene Flächentragwerke - Grundlagen der Modellierung und Berechnung von Scheiben und Platten
Altenbach, Holm; Altenbach, Johannes; Naumenko, Konstantin
In: Heidelberg: Springer Vieweg, 2016, Online-Ressource (XIX, 531 S. 167 Abb. in Farbe, online resource) - (SpringerLink; Bücher), ISBN: 978-3-662-47230-9
Ebene Flächentragwerke - Grundlagen der Modellierung und Berechnung von Scheiben und Platten
Altenbach, Holm; Altenbach, Johannes; Naumenko, Konstantin
In: Heidelberg: Springer Vieweg, 2016, 1 Online-Ressource (XIX, 531 Seiten), ISBN: 978-3-662-47230-9
Scientific monograph
Modeling High Temperature Materials Behavior for Structural Analysis - Part I: Continuum Mechanics Foundations and Constitutive Models
Naumenko, Konstantin; Altenbach, Holm
In: Cham: Imprint: Springer, 2016, Online-Ressource (XIII, 371 p. 107 illus., 5 illus. in color, online resource) - (Advanced Structured Materials; 28; SpringerLink; Bücher), ISBN: 978-3-319-31627-7 [Description based upon print version of record]
Modeling high temperature materials behavior for structural analysis - part I: continuum mechanics foundations and constitutive models
Naumenko, Konstantin; Altenbach, Holm
In: Cham: Imprint: Springer, 2016, 1 Online-Ressource (XIII, 371 p. 107 illus., 5 illus. in color) - (Advanced Structured Materials; 28), ISBN: 978-3-319-31627-7
Non-peer-reviewed journal article
Anforderungen an die Konstitutivmodellierung des inelastischen Verhaltens von Hochtemperaturwerkstoffen
Altenbach, Holm; Naumenko, Konstantin
In: Rundbrief / Gesellschaft für Angewandte Mathematik und Mechanik - Dresden : GAMM . - 2016, Heft 2, S. 4-10
2015
Book chapter
Creep behavior modeling of polyoxymethylene (POM) applying rheological models
Altenbach, Holm; Girchenko, Anna; Kutschke, Andreas; Naumenko, Konstantin
In: Inelastic behavior of materials and structures under monotonic and cyclic loading - Heidelberg [u.a.] : Springer . - 2015, S. 1-5 - (Advanced structured materials; 57)
Analysis of inelastic behavior for high temperature materials and structures
Naumenko, Konstantin; Altenbach, Holm
In: From Creep Damage Mechanics to Homogenization Methods - A Liber Amicorum to celebrate the birthday of Nobutada Ohno - Cham : Springer ; Altenbach, Holm *1956-* . - 2015, S. 241-298 - (Advanced structured materials; 64)
Approximate rules for calculation of notch stresses considering plasticity and creep
Altenbach, Holm; Eisenträger, Johanna; Naumenko, Konstantin
In: Plastic behavior of conventional and advanced materials: theory, experiment, and modeling / International Symposium on Plasticity and its Current Applications , 2015 - Fulton, Maryland, USA : NEAT Press, S. 124-126 Kongress: PLASTICITY' 15 21 Montego Bay, Jamaica 2015.01.04-09
Peer-reviewed journal article
Prediction of accumulation of technological stresses in a pipeline upon its repair by a composite band
Altenbach, Holm; Naumenko, Konstantin; Lvov, G.; Sukiasov, V.; Podgorny, A.
In: Mechanics of composite materials - Dordrecht [u.a.] : Springer Science + Business Media B.V, Bd. 51 (2015), Heft 2, S. 139-156
Micromechanical simulation of grain boundary cavitation in copper considering non-proportional loading
Ozhoga-Maslovskaja, Oksana; Naumenko, Konstantin; Altenbach, Holm; Prygorniev, Oleksandr
In: Computational materials science - Amsterdam [u.a.] : Elsevier Science - Vol. 96.2015, Part A, S. 178-184
Experimental identification of flow properties of a S355 structural steel for hot deformation processes
Schmicker, David; Paczulla, Stefan; Nitzschke, Steffen; Groschopp, Sven; Naumenko, Konstantin; Jüttner, Sven; Strackeljan, Jens
In: The journal of strain analysis for engineering design - London : Sage Publ., Bd. 50 (2015), Heft 2, S. 75-83
Application of the first-order shear deformation theory to the analysis of laminated glasses and photovoltaic panels
Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm; Köppe, Heinz
In: International journal of mechanical sciences - Amsterdam [u.a.] : Elsevier Science, Bd. 96-97 (2015), S. 163-171
Inelastic deformation of conductive bodies in electromagnetic fields
Altenbach, Holm; Morachkovsky, Oleg; Naumenko, Konstantin; Lavinsky, Denis
In: Continuum mechanics and thermodynamics - Berlin : Springer, Bd. 28 (2016), Heft 5, S. 1421-1433
On the use of the first order shear deformation plate theory for the analysis of three-layer plates with thin soft core layer
Altenbach, Holm; Eremeyev, Victor; Naumenko, Konstantin
In: ZAMM - Berlin : Wiley-VCH, Bd. 95 (2015), Heft 10, S. 1004-1011
A relationship between effective work of adhesion and peel force for thin hyperelastic films undergoing large deformation
Eremeyev, Victor; Naumenko, Konstantin
In: Mechanics research communications - Amsterdam [u.a.] : Elsevier, Bd. 69 (2015), S. 24-26
Analysis of casting materials under thermal fatigue
Altenbach, Holm; Laengler, Frank; Naumenko, Konstantin; Ievdokymov, Mykola
In: Applied mechanics and materials - Baech : Trans Tech Publications Ltd., Bd. 784 (2015), S. 95-103
A user-defined finite element for laminated glass panels and photovoltaic modules based on a layer-wise theory
Eisenträger, J.; Naumenko, Konstantin; Altenbach, Holm; Meenen, J.
In: Composite structures - Amsterdam : Elsevier, Bd. 133 (2015), S. 265-277
Dissertation
Statistical analysis of stress and deformation state in polycrystalline aggregates with a large number of grains
Prygorniev, Oleksandr; Naumenko, Konstantin
In: Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2015, VII, 117 S.
2014
Book chapter
Constitutive models for creep-damage behavior at quasi-static and cyclic loading
Altenbach, Holm; Kutschke, Andreas; Naumenko, Konstantin
In: Multi-scale modeling and plasticity characterization of advanced materials : proceedings of Plasticity '14 ; the twentieth international symposium on plasticity and its current applications, [January, 3-8, 2014, Freeport, Bahamas]. - Fulton, Md. : NEAT Press, S. 67-69Kongress: PLASTICITY; 20 (Freeport, Bahamas) : 2014.01.03-08
Peer-reviewed journal article
A phase mixture model for anisotropic creep of forged AlCuMgSi alloy
Naumenko, Konstantin; Gariboldi, Elisabetta
In: Materials science and engineering / A. - Amsterdam : Elsevier, Bd. 618.2014, S. 368-376
A constitutive model for inelastic behavior of casting materials under thermo-mechanical loading
Längler, Frank; Naumenko, Konstantin; Altenbach, Holm; Ievdokymov, Mykola
In: The journal of strain analysis for engineering design : JSA. - London : Sage Publ, Bd. 49.2014, 6, S. 421-428
A layer-wise theory for laminated glass and photovoltaic panels
Naumenko, Konstantin; Eremeyev, Victor A.
In: Composite structures : an international journal. - Amsterdam : Elsevier, Bd. 112.2014, S. 283-291
Kontaktwechselwirkung einer Rohrleitung mit der Reparaturbandage aus einem Kompositwerkstoff
Altenbach, Holm; Beschetnikov, Dmitriy A.; Lvov, Gennadiy I.; Naumenko, Konstantin; Sukiasov, Vladimir G.
In: Forschung im Ingenieurwesen : research journal. - Berlin : Springer, Bd. 78.2014, 1/2, S. 59-67
Homogenisation approach in analysis of creep behaviour in multipass weld
Lvov, Ivan; Naumenko, Konstantin; Altenbach, Holm
In: Materials science and technology : MST ; a publication of The Institute of Materials. - London [u.a.] : Maney Publishing, Bd. 30.2014, 1, S. 50-53
2013
Abstract
Analysis of laminates for photovoltaic appliacations
Naumenko, Konstantin; Weps, Matthias; Eremeyev, Victor; Altenbach, Holm
In: 8th German-Greek-Polish Symposium Recent advances in mechanics / German-Greek-Polish Symposium Recent Advances in Mechanics , 2013 - Bremen : Univ. of Bremen ; Kienzler, Reinhold *1950-*, S. 59-60 Kongress: German-Greek-Polish Symposium on recent advances mechanics 8 Goslar 2013.09.09-13
A material model for describing the anomalous ratcheting effect of advanced chromium steels
Kutschke, Andreas; Naumenko, Konstantin; Altenbach, Holm
In: CanCNSM 2013. - Montréal, insges. 2 S.Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]
Book chapter
Näherungsweise Ermittlung der Spannungskonzentration an Kerben bei inelastischen Verformungen im Hochtemperaturbereich
Eisenträger, Johanna; Naumenko, Konstantin; Altenbach, Holm; Lenz, Wolfgang
In: Effizienz, Präzision, Qualität - 11. Magdeburger Maschinenbau-Tage ; 25. und 26. September 2013 an der OVGU: 11. Magdeburger Maschinenbau-Tage ; 25. und 26. September 2013 an der OVGU - Magdeburg: Univ., 2013, Paper B2-5, insgesamt 10 S.Kongress: Magdeburger Maschinenbau-Tage 11 (Magdeburg : 2013.09.25-26)
Robust methods for creep fatigue analysis of power plant components under cyclic transient thermal loading
Kostenko, Yevgen; Almstedt, Henning; Naumenko, Konstantin; Linn, Stefan; Scholz, Alfred
In: Proceedings of the ASME Turbo Expo 2013, Volume 5B: Oil and gas applications; steam turbines . - New York, N.Y : ASME, insges. 8 S.
Ein robuster Ansatz zur Simulation des kontinuierlich angetriebenen Rotationsreibschweißprozesses
Schmicker, David; Naumenko, Konstantin; Strackeljan, Jens
In: Effizienz, Präzision, Qualtität. - Magdeburg : Univ., insges. 9 S., 2013Kongress: Magdeburger Maschinenbau-Tage; 11 (Magdeburg) : 2013.09.25-26
Peer-reviewed journal article
Unsymmetric three-layer laminate with soft core for photovoltaic modules
Weps, Matthias; Naumenko, Konstantin; Altenbach, Holm
In: Composite structures. - Amsterdam : Elsevier, Bd. 105.2013, S. 332-339
A robust simulation of Direct Drive Friction Welding with a modified Carreau fluid constitutive model
Schmicker, David; Naumenko, Konstantin; Strackeljan, Jens
In: Computer methods in applied mechanics and engineering. - Amsterdam [u.a.] : Elsevier Science, Bd. 265.2013, S. 186-194
Näherungsverfahren zur Berechnung von Kerbspannungen und -dehnungen bei Plastizität und Kriechen
Eisenträger, Joahanna; Naumenko, Konstantin; Altenbach, Holm; Lenz, Wolfgang
In: Forschung im Ingenieurwesen. - Berlin : Springer, Bd. 77.2013, 3/4, S. 71-80
Modeling creep damage of an aluminum–silicon eutectic alloy
Altenbach, Holm; Kozhar, Sergii; Naumenko, Konstantin
In: International journal of damage mechanics - Thousand Oaks, Calif. [u.a.] : Sage, Bd. 22 (2013), Heft 5, S. 683-698
Micro-macro analysis of creep and damage behavior of multi-pass welds
Lvov, Ivan; Naumenko, Konstantin; Altenbach, Holm
In: Problemy mašinostroenija. - Kiev : Izd. "Naukova Dumka", Bd. 16.2013, 1, S. 31-38
Numerical properties of spherical and cubical representative volume elements with different boundary conditions
Glüge, Rainer; Weber, Martin
In: Technische Mechanik : wissenschaftliche Zeitschrift für Anwendungen der technischen Mechanik. - Magdeburg : Inst, Bd. 33.2013, 2, S. 97-103
Article in conference proceedings
Surface layer effects in polycrystalline structures under cyclic viscoplasticity
Prygorniev, Oleksandr; Naumenko, Konstantin
In: CanCNSM 2013. - Montréal, insges. 6 S.Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]
A unified constitutive model for the thermo-mechanical fatigue analysis of turbochargers
Längler, Frank; Naumenko, Konstantin; Altenbach, Holm; Ievdokymov, Mykola
In: CanCNSM 2013. - Montréal, insges. 6 S.Kongress: CanCNSM; 4 (Montréal, Canada) : 2013.07.23-26[Beitrag auf CD-ROM]
A holistic approach on the simulation of rotary-friction-welding
Schmicker, David; Naumenko, Konstantin; Strackeljan, Jens
In: The 7th Asia-Pacific International IIW Congress. - Singapore, insges. 6 S., 2013Kongress: Asia-Pacific International IIW Congress on Recent Development in Welding and Joining Technologies; 7 (Singapore) : 2013.07.08-10[vollständiger Beitrag auf CD-ROM]
2012
Book chapter
Creep deformation characteristics of Al-rich Ti-Al alloys
Sturm, Daniel; Heilmaier, Martin; Naumenko, Konstantin; Kozhar, Sergii; Krüger, Manja
In: Creep and fracture of engineering materials and structures - proceedings of the 12th International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11), Kyoto, Japan, May 27-31, 2012 - Sendai: Japan Institute of Metals, 2012 . - 2012, insges. 4 S.Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11) 12 (Kyoto, Japan : 2012.05.27-31)
Creep fatigue analysis of power plant components under transient thermal loading
Kutschke, Andreas; Linn, Stefan; Naumenko, Konstantin; Scholz, Alfred
In: Creep and fracture of engineering materials and structures. - the Japan Inst. of Metals, insges. 4 S., 2012Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11); 12 (Kyoto, Japan) : 2012.05.27-31
Modeling creep ratcheting of an aluminum-silicon eutectic alloy
Altenbach, Holm; Kozhar, Sergii; Naumenko, Konstantin
In: Creep and fracture of engineering materials and structures: proceedings of the 12th International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11), Kyoto, Japan, May 27-31, 2012 - Sendai: Japan Institute of Metals, 2012, Art. C35, insgesamt 4 S.Kongress: International Conference on Creep and Fracture of Engineering Materials and Structures (JIMIS 11) 12 (Kyoto, Japan : 2012.05.27-31
Original article in peer-reviewed international journal
Analysis of laminated glass beams for photovoltaic applications
Schulze, Stefan-H.; Pander, Matthias; Naumenko, Konstantin; Altenbach, Holm
In: International journal of solids and structures - New York, NY [u.a.]: Elsevier, Bd. 49.2012, 15/16, S. 2027-2036
Peer-reviewed journal article
Comparison of spherical and cubical statistical volume elements with respect to convergence, anisotropy, and localization behavior
Glüge, Rainer; Weber, Martin; Bertram, Albrecht
In: Computational materials science - Amsterdam [u.a.] : Elsevier Science, Bd. 63 (2012), S. 91-104
2011
Original article in peer-reviewed international journal
Multi-axial thermo-mechanical analysis of power plant components from 912% Cr steels at high temperature
Naumenko, Konstantin; Kutschke, Andreas; Kostenko, Yevgen; Rudolf, Thorsten
In: Engineering fracture mechanics. - Kidlington : Elsevier Science, Bd. 78.2011, 8, S. 1657-1668
Multi-axial thermo-mechanical analysis of power plant components from 9–12% Cr steels at high temperature
Naumenko, Konstantin; Kutschke, Andreas; Kostenko, Yevgen; Rudolf, Thorsten
In: Engineering Fracture Mechanics
Conservation laws and prediction methods for stress concentration fields
Altenbach, Holm; Eremeyev, Victor A.; Kutschke, Andreas; Naumenko, Konstantin
In: Acta mechanica. - Wien : Springer, Bd. 218.2011, 3/4, S. 349-355
Multi-axial thermo-mechanical analysis of power plant components from 9-12% Cr steels at high temperature
Naumenko, Konstantin; Kutschke, Andreas; Kostenko, Yevgen; Rudolf, Thorsten
In: Engineering fracture mechanics. - Kidlington : Elsevier Science, Bd. 78.2011, 8, S. 1657-1668
Inelastic analysis versus simplified rules for stress concentration fields under variable loading and high temperature
Naumenko, Konstantin; Altenbach, Holm; Kutschke, Andreas
In: Materials research innovations. - Leeds : Maney, Bd. 16.2011, 1, S. 205-208
A combined model for hardening, softening, and damage processes in advanced heat resistant steels at elevated temperature
Naumenko, Konstantin; Altenbach, Holm; Kutschke, Andreas
In: International journal of damage mechanics. - Thousand Oaks, Calif. [u.a.] : Sage, Bd. 20.2011, 4, S. 578-597
Original article in peer-reviewed periodical-type series
Characterization of polymeric interlayers in laminated glass beams for photovoltaic applications
Schulze, Stefan-H.; Pander, Matthias; Naumenko, Konstantin; Girchenko, Anna; Altenbach, Holm
In: Shell-like structures. - Berlin [u.a.] : Springer, S. 499-506, 2011 - (Advanced structured materials; 15)
A variationally consistent derivation of microcontinuum theories
Meenen, Johannes; Altenbach, Holm; Eremeyev, Victor; Naumenko, Konstantin
In: Shell-like structures. - Berlin [u.a.] : Springer, S. 571-584, 2011 - (Advanced structured materials; 15)
2010
Conference/Essay
Modelling of low cycle fatigue for an aluminum alloy at elevated temperature
Altenbach, Holm; Naumenko, Konstantin; Kozhar, Sergii
In: Finite plasticity and visco-plasticity of conventional and emerging materials - Fulton, Md. : NEAT Press . - 2010, S. 22-24
Stress range dependent creep and damage - experimentel observations and their phenomenological description
Altenbach, Holm; Kutschke, Andreas; Naumenko, Konstantin
In: Finite plasticity and visco-plasticity of conventional and emerging materials - Fulton, Md. : NEAT Press . - 2010, S. 55-57
2009
Article in journal
Vzaimosvjazʹ konstrukcionnogo analiza i modelirovanija potoka polimerov, armirovannych korotkimi voloknami: predskazanie svojstv i peredača rezulʹtatov - Coupling of a structural analysis and flow simulation for short-fiber-reinforced polymers: property prediction and transfer of results
Kröner, Carsten; Altenbach, Holm; Naumenko, Konstantin
In: Mechanika kompozitnych materialov - Riga : Izd. Zinatne, Bd. 45 (2009), Heft 3, S. 367-378
Coupling of a structural analysis and flow simulation for short-fiber-reinforced polymers - property prediction and transfer of results
Kröner, Carsten; Altenbach, Holm; Naumenko, Konstantin
In: Mechanics of composite materials - New York, NY : Faraday Press, Bd. 45 (2009), Heft 3, S. 249-256
Creep analysis of power plant components from 1% CRMOV and 10% CRMOV steels
Kostenko, Y.; Schwass, G.; Naumenko, Konstantin
In: OMMI - Leatherhead, Surrey : European Technology Development, Bd. 6 (2009), Heft 2, S. 1-10
Rotation of a slender particle in a shear flow - influence of the rotary inertia and stability analysis
Altenbach, Holm; Brigadnov, Igor A.; Naumenko, Konstantin
In: Zeitschrift für angewandte Mathematik und Mechanik - Weinheim : Wiley-VCH, Bd. 89 (2009), Heft 10, S. 823-832
Creep analysis with a stress range dependent constitutive model
Naumenko, Konstantin; Altenbach, Holm; Gorash, Yevgen
In: Archive of applied mechanics - Heidelberg : Springer, Bd. 79 (2009), S. 619-630
Structural analysis of a power plant component using a stress-range-dependent creep-damage constitutive model
Naumenko, Konstantin; Kostenko, Y
In: Materials science and engineering / A - Amsterdam [u.a.] : Elsevier, Bd. 510/511 (2009), S. 169-174
Conference/Essay
Modeling of stress range dependent creep and damage for the structural analysis
Naumenko, Konstantin; Altenbach, Holm
In: Creep & fracture in high temperature components - Lancaster, Pa. : DEStech Publ. . - 2009, S. 974-984
Creep analysis for a wide stress range based on stress relaxation experiments
Altenbach, Holm; Naumenko, Konstantin; Gorash, Yevgen
In: Engineering plasticity and its applications from nanoscale to macroscale ; proceedings of the 9th AEPA 2008, Daejeon, Korea, 20 - 24 October 2008 - Singapore [u.a.] : World Scientific . - 2009, S. 41-46
2008
Article in journal
Steady-state creep of a pressurized thick cylinder in both the linear and the power law ranges
Altenbach, Holm; Gorash, Yevgen; Naumenko, Konstantin
In: Acta mechanica - Wien : Springer, Bd. 195 (2008), S. 263-274
Analytische Näherungslösung für die viskoelastische Verformung dünnwandiger Bauteile
Sukiasov, Vladimir; Altenbach, Holm; Naumenko, Konstantin
In: Forschung im Ingenieurwesen - Berlin : SpringerVieweg, Bd. 72 (2008), S. 183-191
Conference/Essay
Numerische Zeitstandanalyse einer Kraftwerkskomponente mit einem Kriechschädigungs-Werkstoffmodell
Kostenko, Yevgen; Naumenko, Konstantin
In: Langzeitverhalten warmfester Stähle und Hochtemperaturwerkstoffe - Düsseldorf : VDEh . - 2008, S. 37-46
Monograph article
Fiber rotation motion in homogeneous flows
Altenbach, Holm; Naumenko, Konstantin; Renner, Barbara
In: Micro-macro-interactions - in structured media and particle systems - Berlin : Springer . - 2008, S. 133-142
2007
Article in journal
Influence of rotary inertia on the fiber dynamics in homogeneous creeping flows
Altenbach, Holm; Naumenko, Konstantin; Pylypenko, Sergeii; Renner, Barbara
In: Zeitschrift für angewandte Mathematik und Mechanik - Weinheim : Wiley-VCH, Bd. 87 (2007), Heft 2, S. 81-93
Numerical benchmarks for creep-damage modeling
Altenbach, Holm; Naumenko, Konstantin; Gorash, Yegvgen
In: Proceedings in applied mathematics and mechanics - Weinheim : Wiley-VCH, Bd. 7 (2007), S. 4040021-4040022
Monograph
Modeling of creep for structural analysis - with 5 tables
Naumenko, Konstantin; Altenbach, Holm
In: New York: Springer, 2007, Teilw. zugl.: Halle-Wittenberg, Univ., Habil.-Schr., 2006 u.d.T.: Naumenko, Konstantin: Modeling of high-temperature creep for structural analysis applications, XII, 220 S. - (Foundations of engineering mechanics), ISBN: 978-3-540-70834-6 [Literaturverz. S. 199 - 214]
Monograph article
Long term creep analysis of pipe bends in a steam transfer line at elevated temperature
Altenbach, Holm; Naumenko, Konstantin
In: Engineering plasticity and its applications from nanoscale to macroscale ; Pt. 2 - Stafa-Zürich [u.a.] : Trans Tech Publ. . - 2007, S. 795-802
2006
Article in journal
On the free particle rotation in a polymer melt
Altenbach, Holm; Naumenko, Konstantin; Pylypenko, Sergiy; Renner, Barbara
In: Strojnícky časopis - Bratislava : [Verlag nicht ermittelbar], Bd. 57 (2006), Heft 2, S. 112-126
Steady-state creep analysis of pressurized pipe weldments by perturbation method
Shutov, A. V.; Altenbach, Holm; Naumenko, Konstantin
In: International journal of solids and structures - New York, NY [u.a.] : Elsevier, Bd. 43 (2006), S. 6908-6920
Ausrichtung von Partikeln in stationären Strömungsfeldern
Altenbach, Holm; Naumenko, Konstantin; Pylypenko, Sergiy; Renner, Barbara
In: Proceedings in applied mathematics and mechanics - Weinheim : Wiley-VCH, Bd. 6 (2006), S. 423-424
Beeinflussung des Schwindungsverhaltens von Thermoplasten beim Spritzgießen durch elastische Werkzeugdeformationen
Radusch, Hans-Joachim; Kies, Torsten; Altenbach, Holm; Naumenko, Konstantin
In: Zeitschrift Kunststofftechnik - München : Hanser, Bd. 2 (2006), Heft 6, S. 1-21
A note on transversely-isotropic invariants
Altenbach, Holm; Naumenko, Konstantin
In: Zeitschrift für angewandte Mathematik und Mechanik - Weinheim : Wiley-VCH, Bd. 86 (2006), Heft 2, S. 162-168
Habilitation
Modeling of high-temperature creep for structural analysis applications
Naumenko, Konstantin
In: Halle Univ., FB Ingenieurwiss., Habil.-Schr., 2006, Online-Ressource, Text + Image
Conference/Essay
Power plant component design using creep-damage analysis
Altenbach, Holm; Naumenko, Konstantin
In: Proceedings of 2006 ASME International Mechanical Engineering Congress & Exposition - New York : ASME, S. 1-10
Creep modeling and long term structural analysis of plates and shells
Altenbach, Holm; Naumenko, Konstantin
In: Anisotropy, texture, dislocations and multiscale modeling in finite plasticity & viscoplasticity, and metal forming ; proceedings of Plasticity '06, the Twelfth International Symposium on Plasticity and its Current Applications - Fulton, Md. : NEAT Press . - 2006, S. 580-582
2005
Article in journal
Analiz vysokotemperaturnoj polzucesti t-obraznogo soedinenija dvuch trub, nagruzennych davleniem, s ucetom anizotropii svojstv materiala v zone svarnogo sva
Altenbach, Holm; Naumenko, Konstantin
In: Vestnik Nacional'nogo Techniceskogo Universiteta "ChPI". - Char'kov : Univ., 2005, S. 57-66
A phenomenological model for anisotropic creep in a multipass weld metal
Naumenko, Konstantin; Altenbach, Holm
In: Archive of applied mechanics. - Berlin : Springer, Bd. 74.2005, S. 808-819
Numerical treatment of finite rotation for a cylindrical particle
Renner, Barbara; Altenbach, Holm; Naumenko, Konstantin
In: Technische Mechanik. - Magdeburg : Inst., Bd. 25.2005, 3-4, S. 151-161
On the numerical prediction of the anisotropic elastic properties in thin-walled structures made from short-fiber reinforced plastics
Altenbach, Holm; Naumenko, Konstantin
In: Computer assisted mechanics and engineering sciences. - Warsaw : PWN, Bd. 12.2005, S. 329-339
Conference/Essay
Modelling of anisotropic creep in a multi-pass weld metal
Altenbach, Holm; Naumenko, Konstantin
In: Dislocations, plasticity, damage and metal forming. - Fulton, Md. : NEAT Press, 2005, S. 385-387
Monograph article
A direct approach to the formulation of constitutive equations for rods and shells
Altenbach, Holm; Naumenko, Konstantin; Zhilin, Pavel A.
In: Shell structures. - London [u.a.] : Taylor & Francis, 2005, S. 87-90
2004
Article in journal
Ein phänomenologisches Modell für anisotropes Kriechen in Schweißnähten
Naumenko, Konstantin; Altenbach, Holm
In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH. - Bd. 4.2004, S. 227-228
Edge effects in moderately thick plates under creep damage conditions
Altenbach, Johannes; Altenbach, Holm; Naumenko, Konstantin
In: Technische Mechanik. - Magdeburg : Inst.. - Bd. 24.2004, 3-4, S. 254-263
Conference/Essay
Shell and solid type finite element analysis of creep in thin-walled structures
Naumenko, Konstantin; Altenbach, Holm
In: Theories of plates and shells. - Berlin [u.a.] : Springer. - 2004, S. 165-176
Boundary layer in a moderately thick plates under creep-damage conditions
Altenbach, Holm; Naumenko, Konstantin
In: Proceedings of the 2004 International Conference on Computational & Experimental Engineering and Science. - Encino : Tech Science Press. - 2004, S. 2111-2116
2003
Article in journal
Ein mikro-polares Modell für Fasersuspensionsströmungen und dessen erste numerische Abschätzung
Altenbach, Holm; Dyogtyev, Oleksandr; Naumenko, Konstantin
In: Proceedings in applied mathematics and mechanics. - Weinheim [u.a.] : Wiley-VCH. - Bd. 3.2003, S. 212-213
Numerical estimation of the elastic properties of thin-walled structures manufactured from short-fiber-reinforced thermoplastics
Altenbach, Holm; Naumenko, Konstantin
In: Mechanics of composite materials. - New York, NY : Faraday Press. - Bd. 39.2003, 3, S. 221-234
Numerical estimation of the elastic properties of thin-walled structures manufactured from short-fiber-reinforced thermoplastics = Cislennaja ocenka uprugich svojstv tonkostennych konstrukcij, izgotovlennych iz korotkovoloknistych termoplastikov
Altenbach, Holm; Naumenko, Konstantin
In: Mechanika kompozitnych materialov. - Riga : Izd. Zinatne. - Bd. 39.2003, 3, S. 333-352
A micro-polar theory for binary media with application to phase-transitional flow of fiber suspensions
Altenbach, Holm; Naumenko, Konstantin
In: Continuum mechanics and thermodynamics. - Berlin : Springer. - Bd. 15.2003, 6, S. 539-570
Conference/Essay
On the predictions of fiber orientation and elastic properties of injection molded-walled parts
Altenbach, Holm; Naumenko, Konstantin
In: Proceedings of the extended abstracts // NMCM 2003, 9th International Conference on Numerical Methods in Continuum Mechanics. - Zilina : Univ., Faculty of Mechanical Engineering, Dept. of Mechanics and Strength of Materials. - 2003, S. 21
A micro-polar theory for binary media with application to flow of fiber suspensions
Altenbach, Holm; Naumenko, Konstantin; Zhilin, Pavel A.
In: Proceedings of the XXX Summer School "Advanced Problems in Mechanics", APM '2002. - St. Petersburg : Russian Akad. of Sciences. - 2003, S. 39-62
Due to technical reasons only 200 publications can be displayed.
View more in the research portal.
